Overview
The Crown Automotive 994021K is a red side marker light kit with lens, bulb and bulb pigtail wiring for the front left position. It fits Jeep CJ5, CJ6 and CJ7 models and J10 and J20 trucks from 1972 through 1988.
The kit is a complete set for the listed front left position, so the bulb and wiring are supplied together with the lens.
Key features
- Red lens
- Kit includes lens, bulb and bulb pigtail wiring
- Front left position
- Fitment across CJ5, CJ6, CJ7, J10 and J20 entries
- It is a direct fit for the CJ5, CJ6, CJ7, J10 and J20 Jeep models.
Choosing a side marker setup
Side marker lights show the outline of a vehicle to other drivers in low light. On older Jeep bodies they usually sit in the fender or body panel, with a lens, a bulb holder and a short run of wiring to the lamp circuit. A replacement kit brings those parts together, so most of the work is matching the position and joining the new pigtail into the existing circuit.
When choosing a setup, match the position first. Front and rear markers are often different parts, and the lens color should match what the vehicle originally used. Because the pigtail is wired in the kit, a fused power feed is a sensible step. Lamp housings on older Jeeps can crack or fade, so check the mounting surface and the seal before the new lens goes on.
- Confirm the front left position before ordering
- Inspect old wiring for brittle insulation
- Use a fused power feed for the pigtail
- Check the seal around the lens before mounting
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 994021K |
| UPC | 848399078466 |
| Color | Red |
| Position | Front left |
| Included | Lens, bulb and bulb pigtail wiring |
| Fit type | Direct fit |
Vehicle fitment
It fits 1972–1980 Jeep CJ5 with Base, Golden Eagle, Laredo and Renegade trims; 1972–1975 Jeep CJ6 Base; 1976–1980 Jeep CJ7 with Base, Golden Eagle, Golden Hawk, Laredo and Renegade trims; and 1976–1988 Jeep J10 and J20 Base trims.
Wrangler YJ and later Jeep models are not in this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The bulb pigtail is wired in the kit, so plan a fused power connection for the wiring. Check local road rules on lamp color before installing a red side marker light.
What’s included
The kit includes the lens, bulb and bulb pigtail wiring. Check the package contents against your installation before starting, including the mounting hardware you will need.









