Overview
The Omix-Ada Rocker Arm Kit, part number 17411.03, is a rocker arm kit for AMC 258 6 cylinder engines with bridges that have no valve cover studs. The kit includes 2 rocker arms, 2 pivots and 1 bridge. It also fits Wrangler 1987–05 with 4.0L 6 cylinder engines.
The manufacturer list covers Jeep Cherokee SJ (1983), CJ5 (1983), CJ7 (1983–1986), Grand Wagoneer (1984–1986), J10 (1983–1987), Scrambler (1983–1985), Wagoneer (1983) and Wrangler YJ (1987–1990).
Key features
- Built for AMC 258 6 cylinder engines
- Designed for bridges without valve cover studs
- Kit includes 2 rocker arms, 2 pivots and 1 bridge
- Description also names Wrangler 1987-05 with 4.0L 6 cylinder engines
Valve train upkeep
Rocker arms on an inline six work in a simple way, with the bridge and pivots directing valve motion from the pushrods. Oil reaches the pivot surfaces through the valve train, so an oil supply issue shows up quickly as clicking or ticking. Keep oil changes on schedule and watch for sludge when the cover comes off, because blocked passages starve the top end.
When rebuilding the top end, replace parts in matched sets where wear is visible. Check the pivots for smooth, free action and look for flat spots on the rocker tips and bridge contact points. Valve adjustment follows the engine service procedure, and the setting should be rechecked after the first drives. A cover gasket that is hardened or leaking should be replaced at the same time, since oil leaks at the top are common on older engines.
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | 17411.03 |
| UPC | 804314075323 |
| Engine application | AMC 258 6 cylinder, 4.0L 6 cylinder |
| Included | 2 rocker arms, 2 pivots, 1 bridge |
Vehicle fitment
The manufacturer list covers Jeep Cherokee SJ (1983), CJ5 (1983), CJ7 (1983–1986), Grand Wagoneer SJ (1984–1986), J10 (1983–1987), Scrambler (1983–1985), Wagoneer SJ (1983) and Wrangler YJ (1987–1990), with the trims named for each.
The Wrangler 1987–05 range is wider than the YJ 1987–1990 entries shown below, so match your model year carefully. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check the bridge style on your engine before installing, since this kit is for bridges without valve cover studs. Stud-style valve covers need a different setup.
What’s included
The kit includes 2 rocker arms, 2 pivots and 1 bridge.









