Overview
The Omix-Ada 11840.07 is a Phillips head hardtop mounting screw for the 1987 to 1995 Jeep Wrangler YJ. It also fits 1982 to 1986 CJ models and the 1982 to 1985 Scrambler, where it retains the hardtop to the tub rail.
These are factory surplus parts that fit as the original did, and they replace OE number J4007007.
Key features
- Phillips head screws
- There are 4 screws per side.
- Threads into tapping plate S-J0968155 on the underside of the tub rail
- Factory surplus parts that replace OE J4007007
Tub rail and hardtop attachment
Hardtop mounting screws carry the load that holds the roof to the tub rail, so their condition matters more than their appearance. Surface rust on the heads is common on older vehicles, but a screw that has rusted through the shank or stretched in its thread should be replaced. Check each fastener for play once it is seated, and make sure the tapping plate beneath has not cracked or pulled loose from the rail.
When swapping screws, avoid cross-threading by starting each one by hand before using a driver, and tighten gradually in a pattern that pulls the roof down evenly. Anti-seize is generally not needed on steel-into-steel threads, and sealant should not be used unless the original procedure calls for it. If the tapping plate is damaged, replacing the plate along with the screws usually makes the attachment more reliable.
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | 11840.07 |
| UPC | 804314293512 |
| Head type | Phillips |
| Screws per side | 4 |
| OE replacement | J4007007 |
| Fitment type | Direct fit |
Vehicle fitment
The manufacturer fitment list names the 1982–1983 Jeep CJ5, the 1982–1986 Jeep CJ7, the 1982–1985 Jeep Scrambler and the 1987–1995 Jeep Wrangler (YJ).
It fits 1982–1983 Jeep CJ5, 1982–1986 CJ7, 1982–1985 Scrambler and 1987–1995 Wrangler YJ. Verify fit against your own year, model and trim, particularly for the 1997–2006 Wrangler (TJ) and 2007–2018 Wrangler JK.
Installation notes
The screws thread into tapping plate S-J0968155 on the underside of the tub rail. Check that the plate is in place before fitting the screws.
What’s included
Screws, sold individually, with 4 screws per side described.
Not included: tapping plate S-J0968155, which the screws thread into. It is not included with this item.









