Overview
The Omix-ADA O2 sensor, part number OAI17222.48, is a replacement exhaust oxygen sensor for 3.6-liter V6 Jeep Wrangler JK models from 2012 to 2018 and 2018 Jeep Wrangler JL models. It is a downstream right-side sensor and replaces OE number 5149180AA.
It is a direct-fit replacement. It installs on the passenger side bank after the catalytic converter and the driver side bank before it, so confirm the bank position first.
Key features
- Downstream right position, passenger side bank after the catalytic converter
- Driver side bank position, before the catalytic converter
- 4-wire connector
- Replaces OE 5149180AA
- Direct-fit replacement built to Omix-ADA specifications
Bank position and wiring
On a V6 engine, each bank has its own oxygen sensors, so the position matters as much as the part number. A sensor on the wrong bank can give readings that look normal but do not match the engine’s actual condition. Mark the old sensor’s location before removing it.
A four-wire sensor has a heater circuit in addition to the signal wire, so the plug should match exactly. Pin orientation and wire colors are easy to misread at a glance. Compare both plugs before connecting, and keep the harness clear of the exhaust and moving parts.
- Match the number of wires on the plug
- Confirm the bank before removing the old sensor
- Check whether the new sensor is pre-coated before adding anti-seize
- Route the harness away from hot exhaust surfaces
Specifications
| Brand | Omix-ADA |
|---|---|
| Part number | OAI17222.48 |
| Position | Downstream right |
| Connector | 4-wire |
| Engine | 3.6-liter V6 |
| OE replacement number | 5149180AA |
Vehicle fitment
Fits 2012–2018 Jeep Wrangler (JK), including 2-door and Unlimited 4-door models in the 75th Anniversary, Rubicon, Sahara, Sport and Sport S trims, and 2018 Jeep Wrangler (JL) Moab, Rubicon, Sahara, Sport and Sport S trims.
Earlier Wrangler generations such as the TJ, LJ and YJ are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Confirm which bank the sensor serves before installing it, since the passenger side (after the catalytic converter) and driver side (before it) use different positions. Let the exhaust cool before removing the old sensor.
What’s included
The package includes a single oxygen sensor. Check the package contents against your installation, including whether a wiring harness or tools are needed.











