Overview
The Crown Automotive oxygen sensor, part number 5149180AA, is a factory style replacement for the downstream left position on Jeep, Dodge, Ram and Fiat vehicles. It carries Crown number CRO5149180AA. An oxygen sensor measures the oxygen in the exhaust and reports it to the engine computer.
The sensor is built for the downstream left position. It covers Wrangler JK, Grand Cherokee WK, Cherokee KL and Renegade models, along with several Ram and ProMaster vehicles.
Key features
- Factory style replacement oxygen sensor, per the short description
- Position: downstream left
- Fitment list covers Jeep Wrangler JK, Grand Cherokee WK and Cherokee KL
- Also fits Dodge Durango and Journey, Ram 1500 to 3500 and Fiat 500X
- Fit type is direct, so it installs in place of the original sensor.
Oxygen sensor wear signs
Downstream oxygen sensors mainly watch the catalytic converter, so their job is to confirm it is working. As they age, they can respond slowly, and the engine computer may log a code for the converter or the sensor circuit. Fuel economy can drop when the feedback signal becomes unreliable.
Contamination is a common cause of early failure. Coolant, oil residue or silicone from sealants can coat the sensor tip, and a leak upstream can skew the readings. Before replacing the sensor, check for exhaust leaks and confirm the wiring plug is clean and fully seated.
- Check for exhaust leaks ahead of the sensor
- Inspect the wiring for heat damage near the exhaust
- Look for oil or coolant residue on the sensor tip
- Clear codes and recheck after a few drive cycles
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | CRO5149180AA |
| Part type | Oxygen sensor |
| Position | Downstream left |
| Fitment type | Direct fit |
Vehicle fitment
Fits 2011 to 2018 Dodge Durango and Journey; 2016 Fiat 500X; 2016 and 2018 Jeep Cherokee; 2014 to 2017 Jeep Cherokee (KL); 2018 Jeep Grand Cherokee; 2011 to 2017 Jeep Grand Cherokee (WK); 2015 to 2018 Jeep Renegade; 2012 to 2018 Jeep Wrangler (JK); 2013 to 2018 Ram 1500; 2012 to 2018 Ram 2500; 2013 to 2018 Ram 3500; 2014 to 2018 Ram ProMaster 1500, 2500 and 3500; and 2015 to 2018 Ram ProMaster City.
Wrangler JL models, Grand Cherokee WJ models and Liberty KJ models are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Wrangler JL, Grand Cherokee WJ and Liberty KJ models fall outside the covered vehicles. Confirm your vehicle’s year, model and trim before ordering.
What’s included
Check the old sensor’s location and wiring plug before removing it. This part is made for the downstream left position only.









