Overview
The Crown Automotive Upper Radiator Hose, part number 52028144AC, is an upper radiator hose for the 1998-2006 Jeep Wrangler (TJ) with the 4.0L 6 cylinder engine. It fits the 65th Anniversary Edition, Rubicon, SE, Sahara, Sport and X trims.
This upper radiator hose carries engine coolant at the top of the cooling system and replaces a worn or damaged hose. It is a direct fit with an Upper position, a 6 cylinder engine and Right Hand Drive.
Crown Automotive describes itself as a manufacturer and distributor of replacement parts for Jeep vehicles for over 50 years, with over 8,000 different part numbers, including many factory-discontinued items.
Key features
- Upper radiator hose position
- For the 4.0L 6 cylinder engine
- Direct fit replacement
- Fits the Jeep Wrangler (TJ), 1998-2006
- Covers 65th Anniversary Edition, Rubicon, SE, Sahara, Sport and X trims
- Made by Crown Automotive, a Jeep replacement parts maker
Keeping the cooling hose sound
The upper radiator hose is under constant heat and pressure, so its rubber wears from the inside as well as the outside. Signs of a failing hose include bulging or soft spots, cracks near the clamps, and coolant residue around the connections. A hose that collapses under suction can restrict flow and let the engine run hotter at idle, which is why it is worth inspecting whenever the cooling system is opened.
When replacing the upper hose, check the thermostat housing, the clamps and the lower hose at the same time, since they age together and are reached through the same work. Use new clamps where the design calls for them and make sure the hose seats fully over each neck before tightening. Refill with the correct coolant type and bleed air from the system after the refill, because trapped air can cause a false overheating reading.
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 52028144AC |
| UPC | 848399090598 |
| Product type | Upper radiator hose |
| Position | Upper |
| Engine | 4.0L 6 cylinder |
| Drive | Right Hand Drive |
| Fit type | Direct fit |
| Vehicle | 1998-2006 Jeep Wrangler (TJ) |
Vehicle fitment
It fits the 1998-2006 Jeep Wrangler (TJ) in 65th Anniversary Edition, Rubicon, SE, Sahara, Sport and X trims. It is for the 4.0L 6 cylinder engine.
It fits only the Wrangler (TJ). Other generations such as the YJ and JK, other Jeep models and engines other than the 6 cylinder are not covered. Verify the year, model and trim for your vehicle before purchase.
Installation notes
Work on a cool engine with the battery disconnected, and tighten all fasteners to the torque values for the cooling system. Fuel and cooling system parts call for careful handling and professional installation if you are unsure.
- Replace gaskets and seals as the manufacturer directs, and keep ignition sources away from fuel system components.
- Check for leaks and loose connections after the first start and again after the first miles of driving.
- Follow local emissions regulations for any engine or exhaust related part.









