Overview
The Omix-ADA 12021.29 is a lower driver side bumper gusset for the 1941-1942 Willys MB (Base). Omix-ADA lists its position as front left, lower, and offers it as a direct OE replacement made to the original specifications.
Omix-ADA backs this part with a limited five year manufacturers warranty. The upper driver side gusset carries the separate number 12021.27, so confirm the position number before choosing between the two.
Key features
- Lower position, front left (driver side)
- Direct replacement made to the original specification
- Omix-ADA part number 12021.29
- Five year limited warranty from Omix-ADA.
Bumper gusset fit and mounting
A bumper gusset braces the bumper to the frame, so it carries load during winching and when the bumper takes an impact. Before installing, inspect the old gusset for cracks at the welds, bent flanges and elongated bolt holes. A part that is bent or cracked will not hold the bumper in line, so fit a new gusset only after the mounting surface is clean.
Position matters on a gusset. Check whether the old part is upper or lower, and driver side or passenger side, since the two gussets on the same bumper are not interchangeable. Compare the bolt hole layout with the frame before bolting it up, and keep the mounting surfaces flat so the gusset does not pull the bumper out of alignment.
Other parts often replaced at the same time include the bumper bolts and any weld-on brackets. Replacing worn hardware with fresh bolts of the correct grade helps keep the joint tight over time. Recheck the bumper alignment and bolt torque after the first trail or road use.
- Check upper or lower position before ordering
- Inspect welds and flanges for cracks
- Replace worn bumper bolts with fresh hardware
- Recheck alignment after the first few drives
Specifications
| Brand | Omix-ADA |
|---|---|
| Part number | 12021.29 |
| UPC | 804314066031 |
| Position | Front left, lower (driver side) |
| Fit type | Direct fit |
| Warranty | Covered by a limited five year warranty from Omix-ADA. |
Vehicle fitment
It fits the 1941-1942 Willys MB (Base).
Other Willys generations and later Jeep models are not covered by this list. Confirm your vehicle’s year, model and trim before ordering.
What’s included
Check the package contents against your installation before starting.












