Overview
The Omix-ADA 12012.31 is a driver-side ball stud for the liftgate of a hardtop Jeep Wrangler. The manufacturer fitment list covers the 2007–2018 Wrangler JK and the 1997–2006 Wrangler TJ.
The stud is built to replace the factory part once it corrodes or breaks off. It suits 2 and 4-door models.
Key features
- Driver-side location
- Replacement for a worn, corroded or broken factory stud
- Mounts through liftgate glass on hardtops
- UPC 804314259051 and part number 12012.31
Driver side wear checks
The driver side of a hardtop liftgate often carries the same load as the passenger side, so wear on one stud can mirror the other. Look for play at the ball joint, cracks around the mount, and corrosion at the base. Driver side studs are exposed to road spray in many climates, which can speed rust on the stud and its surrounding metal.
Before installing, confirm the stud is the correct side and lay the new parts out against the old ones. Clean the surrounding area and inspect the glass for chips that could crack under the fastener load. Tighten the hardware evenly and recheck it after a few days of driving, since fasteners can settle as the new part beds in.
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | 12012.31 |
| UPC | 804314259051 |
| Location | Driver side |
| Mounting | Through liftgate glass (hardtop) |
| Body style | 2 and 4-door |
Vehicle fitment
It fits the 2007–2018 Jeep Wrangler (JK), including Unlimited trims such as Unlimited Rubicon and Unlimited Sahara, and the 1997–2006 Jeep Wrangler (TJ).
Other generations are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The stud bolts through liftgate glass, so it suits only hardtop liftgates. Confirm the included hardware before fitting the stud.
What’s included
Driver-side liftgate ball stud, part number 12012.31.









