Overview
The Omix-Ada 17250.03 is a chrome ignition lock cylinder with a key, sold under part number 17250.03. It fits CJ models with or without a tilt wheel and comes with 2 keys. The cylinder has no groove.
Key features
- Chrome finish
- Fits CJ models with or without tilt wheel
- Includes 2 keys
- Column mounting type
- No groove on the cylinder
Lock and key replacement
An ignition lock cylinder is the part the key turns to operate the ignition switch and, on many steering columns, the lock that holds the key in place. When a cylinder wears, keys may feel loose, turn with difficulty or fail to return to the correct position. Replacement is usually simpler than repairing a worn cylinder, but the new cylinder must match the column type and keyway of the vehicle.
Before pulling the old cylinder, record how many keys are in use and check that the new keys cut to the same pattern. Test the cylinder through every key position before reinstalling the trim, and keep the old lock until the new one is confirmed working. Ignition switches and cylinders often wear together, so inspect the switch while the column is open.
- Check that all keys turn smoothly before final assembly
- Inspect the wiring behind the column for chafing
- Note whether the steering column has a tilt wheel
- Replace worn keys together with the cylinder
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | 17250.03 |
| UPC | 804314149543 |
| Finish | Chrome |
| Mounting type | Column |
| Keys included | 2 |
| Cylinder groove | None |
| Fitment | Direct fit, no vehicle named |
Vehicle fitment
No year, make, model or chassis code applies to this lock, so confirm the vehicle’s details before ordering. Ignition switches for CJ5 and CJ6 models from 1973-75 are a separate item, number 931697.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check whether your steering column has a tilt wheel before fitting, since this cylinder works with both setups.
What’s included
The lock cylinder comes with 2 keys. Not included: The ignition switch is a separate component.












