Overview
The Omix-ADA front hub, part number 16705.05, is a hub-only assembly for 5 bolt hub assemblies. No other axle components come with it. It carries a limited five year warranty and is built as a direct OE replacement part.
Choosing a replacement hub
A front hub carries the wheel bearings and mounts the wheel and brake rotor on the axle, so it takes steady load and road shock on every trip. Replacing a hub is usually a matched job: the new hub should be compared with the old one for bolt pattern, mounting face and bearing seat before the old part is discarded. A hub that wobbles, runs warm or makes grinding noise when turning is often worn in the bearings or the hub itself.
Hub-only parts leave the bearing work to you, so plan for new bearings, seals and axle retaining hardware if the old ones are worn or were disturbed during removal. Clean the hub face before fitting, follow the torque sequence from your service procedure, and recheck wheel bearing preload after the first drive. Keeping a note of the bearing part numbers helps on later service visits.
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | 16705.05 |
| UPC | 804314141332 |
| Hub type | Hub only |
| Bolt configuration | 5 bolt hub assemblies |
| Warranty | Limited five year warranty |
Vehicle fitment
No vehicles are named for this hub. It is a direct fit for 5 bolt hub assemblies, so the bolt configuration is the main fit check.
Hub fitment also depends on axle type and bearing setup. Confirm both before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Hub replacement usually involves the bearings, seals and axle retaining hardware. Check your bearing setup, since this is a hub-only part.
What’s included
This is a hub-only part.
Not included: Bearings, seals and axle components are not included.









