Overview
The Omix-ADA 16529.05 is a brass spindle thrust washer for the Dana 30 with drum brakes. It fits the CJ5, CJ6, CJ7 and Scrambler.
A spindle thrust washer takes axial load between the spindle and the axle knuckle.
The washer is built to original specifications and carries a limited five-year warranty.
Key features
- Brass spindle thrust washer
- Dana 30 axle
- For drum brakes
- Direct fit.
- Fits CJ5, CJ6, CJ7 and Scrambler
Thrust washer wear
A thrust washer sits between the spindle and the axle knuckle and takes the side load from the wheel. Brass washers are chosen because they wear gently against steel and let the spindle turn smoothly. Over time the face can wear thin, which shows up as play at the spindle or a faint clunk when the steering moves.
When a washer is replaced, check the spindle and knuckle faces for scoring, and make sure the washer sits flat. A washer that is cocked will wear unevenly and can let the wheel move out of line. Plan time to check the bearings and seals at the same time, since they are reached during the same work.
- Check the spindle and knuckle faces for scoring
- Make sure the washer sits flat before assembly
- Inspect the bearings and seals during the same job
- Replace the washer if play returns after assembly
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | 16529.05 |
| UPC | 804314039868 |
| _pn | 16529.05 |
| Part type | Spindle thrust washer |
| Material | Brass |
| Axle | Dana 30 |
| Brakes | Drum |
| Fit type | Direct fit (Omix-ADA) |
Check the washer dimensions against your old washer before installing.
Vehicle fitment
It fits four Jeep model lines from 1972 to 1986. Confirm fit for your vehicle’s year, model and trim before ordering.
The manufacturer fitment list for part 16529.05 covers: 1972–1983 Jeep CJ5; 1972–1975 Jeep CJ6; 1976–1986 Jeep CJ7; 1981–1985 Jeep Scrambler.
Not listed: models before 1972 and the Wrangler. Confirm your vehicle’s year, model and trim before ordering.
What’s included
- One brass spindle thrust washer









