Overview
The Omix-Ada 7 inch rear left fender flare, part number OAI11608.05, is an oversized flare that adds coverage for larger tires on the 2004–2006 Jeep Wrangler LJ and 1997–2006 Jeep Wrangler TJ. It is the driver side rear flare and bolts onto the vehicle.
The flare is made of UV treated thermoplastic that is designed to resist sun fading. Its surface is intended to protect the body from rock chips and debris when driving off-road. It can be painted to match the body color.
Key features
- Oversized 7 inch coverage for larger tires
- Rear left position, driver side rear
- UV treated thermoplastic that resists sun fading
- Paintable surface
- Designed to bolt onto the vehicle
- Intended to guard against rock chips and debris off-road
Fender flares and larger tires
Fender flares cover the wheel opening and help keep mud, gravel and spray off the side of the vehicle. When a larger tire is fitted, the factory flare can leave the tread outside the body line, so an oversized flare changes how much of the tire is shielded. Coverage matters most on lifted or heavily loaded setups, where the tire moves higher and farther outward over bumps and articulation.
Plastic flares flex more than steel ones under impact, so a bent or cracked edge often shows up after a rough trail day. Check the mounting tabs, bolt holes and inner lip for stress marks each time the wheels come off. Tire rub on the inner edge is a common sign that the flare and tire are not clearing each other, and it can wear paint or split the plastic over time.
Painting a flare works best when the surface is cleaned and lightly scuffed first, and a plastic primer goes on before the topcoat. Keep paint thin so the material can flex without cracking, and touch up chips early.
- Check tire width against the flare before buying tires
- Recheck mounting bolts after the first few trail runs
- Look for cracks along the lip and at the bolt holes
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | OAI11608.05 |
| Flare size | 7 inch oversized |
| Position | Rear left (driver side) |
| Material | UV treated thermoplastic |
| Finish | Paintable |
| Model exclusions | Sahara models excluded |
Vehicle fitment
The manufacturer fitment list covers the 2004–2006 Jeep Wrangler (LJ), including Unlimited and Unlimited Rubicon, and the 1997–2006 Jeep Wrangler (TJ), including 65th Anniversary Edition, Rubicon, SE, Sahara, Sport and X.
Sahara models are excluded. Confirm fit for your vehicle’s year, model and trim before ordering, including for 2007–2018 Wrangler JK and later models.
What’s included
This is one rear left flare. Check whether mounting hardware is needed for your installation before starting.











