Overview
The Crown Automotive 56022321AA is a replacement steel front left fender for the driver side of the 1997–2001 Jeep Cherokee (XJ). Crown marks it as a direct fit part.
The fender is made for the Classic, Country, Limited, SE and Sport trims. Steel body parts can arrive with minor imperfections or transit damage, so inspect it before fitting.
Key features
- Steel construction
- Front left (driver side) position
- It is a direct fit part.
- It fits the 1997–2001 Cherokee XJ.
Fitting a steel fender
A steel fender sits over the wheel well and attaches to the body with bolts along its top, rear and lower edges. Because it is bare steel, it can arrive without the protective coating used on the original, so check the surface for flaws and rust before mounting it. Test-fit the fender with the bolts loose first, so the gaps along the hood and door line can be adjusted before tightening.
Once the fender is aligned, prime any bare spots and apply paint matched to the body. Sealing the seams with an appropriate sealer helps keep water out of the inner panel. Re-check the bolts after the first few drives and whenever the fender is removed for front end work.
- Test-fit before painting
- Prime bare steel to reduce rust
- Seal seams to keep water out
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | CRO56022321AA |
| Location | Driver side |
| Position | Front left |
| Material | Steel |
| Component | Fender |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 1997–2001 Jeep Cherokee (XJ) in Classic, Country, Limited, SE and Sport trims.
Earlier Cherokee XJ years, 1984–1996, and Wrangler models are not on this list. Confirm your vehicle’s year, model and trim before fitting.
Installation notes
Crown Automotive recommends professional installation for this steel fender. Check the fender for imperfections when it arrives, because minor damage can occur in transit.
What’s included
One replacement steel front left fender. No hardware is included with the fender.









