Overview
The Omix-Ada 11602.01 is a six-piece factory-style replacement fender flare kit for the 1987–1995 Jeep Wrangler YJ. It is listed under Omix-Ada part number OAI11602.01 and comes as a set of six, so it covers each flare position on the vehicle.
The flares are made from UV-treated thermoplastic that is hard-wearing and built for long service. They are designed to be painted, and they keep the original factory width.
Each replacement flare is designed to fit into the factory mounting holes, and no drilling is required. If the factory hardware is rusted, some hole modification may be needed.
Key features
- Six-piece factory-style kit
- UV-treated thermoplastic construction
- Paintable finish
- No drilling required for the listed YJ fitment
- Stock width, so the flares keep the factory coverage
Painting flares after fitment
Painting a flare after it is mounted lets the color be matched to the body in place, which avoids gaps from a mismatched shade. Remove any grease and wax from the surface, then scuff it with fine abrasive so the primer can bond. Apply thin coats and allow each one to dry fully before adding the next, since heavy coats can run along the textured edges.
The factory-style flares should be checked after each season of use for chips near the mounting points. Touch-up paint can be applied to small chips before rust starts. Keep the wheel well clean, because packed mud holds moisture against the flare and can speed up corrosion at the fasteners.
- Degrease and scuff before priming
- Apply thin coats and let each dry
- Touch up chips before rust starts
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | 11602.01 (Omix-Ada part number OAI11602.01) |
| UPC | 804314000417 |
| Quantity | Set of 6 |
| Width/coverage | Stock |
| Finish | Paintable |
| Material | UV-treated thermoplastic |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 1987–1995 Jeep Wrangler YJ, including the Base, Islander, Laredo, Renegade, Rio Grande, S, SE, Sahara and Sport trims.
Wrangler models from 1996 onward, including the TJ and LJ, are not covered. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
No drilling is needed, so the flares mount in the factory holes. Rusted factory hardware may need cleaning or replacement, and in that case some hole modification may be needed.
What’s included
A six-piece kit of replacement fender flares.









