Overview
Part number N/FF99115CC-TX is a textured black wheel to wheel nerf step for 1999 to 2016 Ford F-250 Super Duty and F-350 Super Duty trucks. Each bar runs the full distance from the front wheel to the rear wheel.
The steps are heavy duty tubular bars made from .084 wall steel in one welded piece. They have a zinc coat for corrosion protection and a powder-coat finish in textured matte black.
Key features
- Full wheel-to-wheel length
- .084 wall steel tubing
- One-piece welded build
- Zinc coat under the powder coat
- Textured/matte black finish
- Direct Fit marking for the listed trucks
Things to check
Before you mount a step bar, check the distance from the bottom of the door to the top of the rocker panel. A full-span bar needs enough room between the wheels to clear the tires through a full turn. Look at the bar’s height relative to the truck’s rocker, since a low bar can catch on obstacles.
Once installed, treat the bar as a working part. Clean grit from the tubes and joints after trail use, and keep touch-up paint for coating chips. Tighten mounts after the first few drives, and recheck them at regular intervals because the truck’s frame and body flex over time.
- Measure the door-to-rocker gap
- Check tire clearance at full turn
- Recheck mounts after the first drives
- Touch up chips before rust spreads
Specifications
| Brand | N-Fab |
|---|---|
| Part number | N/FF99115CC-TX |
| Length | Wheel to wheel |
| Material | Steel tubing, .084 wall |
| Construction | All welded, one piece |
| Corrosion protection | Zinc coat |
| Finish | Textured/Matte Black |
| Fitment | Direct Fit |
Vehicle fitment
The list shows 1999 to 2016 Ford F-250 Super Duty and 1999 to 2016 Ford F-350 Super Duty trucks, with trims Cabela’s, FX4, Harley-Davidson Edition, King Ranch, Lariat, Platinum, XL and XLT.
Super Duty years from 2017 on, and the Ford F-150, are not in this list. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One set of wheel-to-wheel nerf steps in textured matte black. Check the package contents against your installation, including any brackets, before starting.









