Overview
The N-Fab T0365R is a cab length nerf bar for the 2003–2009 Toyota 4Runner, finished in textured black. It has a hoop-style step with a 2-inch main tube and fits the Limited, SR5 and Sport trims.
The mount sits high and tight to the body for a clean look and some protection from road debris. The drop-down step is placed for easy access on stock and lifted 4Runners. The hoop design is patented.
Key features
- Patented hoop step design from N-Fab.
- 2-inch main tube diameter
- Drop-down step placed for access on stock or lifted 4Runners
- Mounts high and tight to the body
- Fully welded one-piece construction for strength and durability
Hoop bars on a 4Runner
A hoop-style step adds a rigid rail along the lower body while giving a step up into the cab. Because it sits high, it works well for owners who want a tidy look without a wide running board. The drop-down step matters most on a lifted truck, where the cab sits farther off the ground.
Check the bar after trail use and look for any movement at the mounts. Fully welded construction means there are few joints to inspect, but the mounting hardware and the finish still need regular attention. Clean out dirt around the mounts so it does not hold moisture against the steel.
- Check mounts for movement after trail use
- Keep the area around mounts free of dirt
- Look for chips in the textured finish
- Re-check door and tailgate clearance after install
Specifications
| Brand | N-Fab |
|---|---|
| Part number | N/FT0365R |
| Length | Cab Length |
| Main tube diameter | 2-inch |
| Tubing | Steel, .095 wall |
| Construction | Fully welded, 1-piece |
| Finish | Textured Black |
| Fit type | Direct Fit |
Vehicle fitment
It fits the 2003–2009 Toyota 4Runner in Limited, SR5 and Sport trims.
Other 4Runner years, and Toyota models outside the 4Runner, are not covered by this list. Confirm your vehicle’s year, model and trim before ordering.
What’s included
Confirm the fasteners you need before starting the install.











