Overview
The Aries Offroad AscentStep 5.5″ Running Boards, part number 2057975, are gloss black, cab length running boards for a wide range of trucks and SUVs, including the 2015-2022 Chevrolet Colorado, the 2007-2022 Ford F-150 and the 2011-2022 Ram 1500. Mounting brackets are not included.
The AscentStep has a teardrop shaped tube profile and two-part step pads, with a polyethylene tread protruding through a stainless steel overlay for non-skid traction. The boards are built from high-strength steel with a carbide black powder coat finish. They install with the VersaTrac system, using vehicle-specific brackets sold separately.
Installation is no-drill with the VersaTrac brackets. Board length and step pad position are matched to each year, make and model.
Key features
- 5.5″ wide teardrop shaped running boards
- Two-part step pads: polyethylene tread with stainless steel overlay
- High-strength steel construction
- Carbide black powder coat finish
- Cab length
- VersaTrac installation system with vehicle-specific brackets (not included)
- No drilling required with the VersaTrac brackets.
Before you install
Running boards take body weight, so the mounting points and brackets matter more than the board finish. Each board should be checked for clearance against the body, tires, exhaust and wiring once the brackets are in place. Step height and board width also affect how easily passengers climb in and out, so think about who uses the truck most.
Cab length boards cover the space between the front and rear doors and are often chosen for daily use on rough roads and gravel. Steel boards with a powder coat hold up well, but chips expose bare metal, so touch them up early. Polyethylene step pads with a stainless overlay give grip when wet or muddy, and they should be cleaned of mud and grit so the tread keeps its traction.
Re-check fasteners after the first few miles and again after rough use, since vibration can loosen bolts over time. If a board moves or rattles, stop and inspect the brackets before driving further.
- Confirm brackets match your year, make and model
- Look for body and wiring clearance before final torque
Specifications
| Brand | Aries Offroad |
|---|---|
| Part number | 2057975 |
| Product type | Running boards |
| Series | AscentStep |
| Width | 5.5″ |
| Length | Cab length |
| Finish | Gloss black |
| Construction | High-strength steel with carbide black powder coat |
| Step pads | Polyethylene tread with stainless steel overlay |
| Installation system | VersaTrac |
| Fit type | Direct fit |
Vehicle fitment
Fits Chevrolet: 2015-2022 Colorado, 2008-2021 Silverado 1500, 2019 Silverado 1500 LD, 2008-2013 and 2015-2022 Silverado 2500 HD, 2008-2013, 2015-2018 and 2020-2026 Silverado 3500 HD, and 2007-2020 Tahoe. Dodge: 2011-2022 Durango and 2009-2010 Ram 1500. Ford: 2007-2022 F-150, F-250 Super Duty and F-350 Super Duty. GMC: 2015-2022 Canyon, 2008-2021 Sierra 1500, 2019 Sierra 1500 Limited, Sierra 2500 HD and 3500 HD with the same year gaps as the Silverado, and 2007-2020 Yukon. Nissan: 2007-2015, 2017-2018 and 2020 Titan. Ram: 2011-2022 1500 and 2019-2024 1500 Classic.
Fitment depends on year, cab and trim, and the listed years skip some model years. Mounting brackets must be matched to the vehicle separately. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Running boards take body weight, so get the vehicle safely supported and use a helper to hold each board while the brackets are bolted on.
- Torque fasteners to the values in the installation instructions.
- Look for clearance against the body, tires, exhaust and wiring before you finish tightening.
- Go back over every fastener after some miles, then after rough use.
- Seek a professional if the job involves drilling, cutting or welding.
What’s included
- Cab length gloss black running boards
Not included: the vehicle-specific mounting brackets (sold separately).

















