Overview
The N-Fab Predator Pro Step System in textured black, part number PRC1484CC-TX, is a pair of cab length nerf steps for the 2014-2018 Chevrolet Silverado 1500 and 2014-2018 GMC Sierra 1500.
The Predator Pro has a tight-fitting tube, a patented drop-down hoop step and a large dimpled step pad for easy access. The steps are a fully welded 1-piece design with a textured, matte black finish. Installation can be done in a home garage without special tools, though some trucks need minor drilling.
Nerf bars and steps like this one are used as an entry aid for the cab, and the step pad is the surface you stand on. The product comes with easy to understand vehicle-specific installation instructions, and the kit includes two steps and all hardware necessary for installation.
Key features
- Patented drop-down hoop step
- Large dimpled step pad
- Fully welded 1-piece design
- Textured, matte black finish
- Cab length steps
- Vehicle-specific installation instructions
- Includes two steps and all hardware needed for installation
- Some trucks need minor drilling
Getting in and out safely
Cab length nerf steps help you climb into a lifted truck, and the step pad is what your foot and weight rest on every time. Because the pad sits low on the rocker area, it is exposed to mud, rock and debris, so keep it clear and check it after rough trips.
Before choosing a step, think about how you use the truck. Daily entry on pavement has different demands than climbing in and out at a trailhead. Confirm that the bracket points and frame mounts line up with your truck’s cab and body before you drill anything.
- Inspect mounting bolts after the first few trail runs
- Keep the step pad free of packed mud so it stays grippy
- Look for cracks or bending at the drop-down hoop
- Touch up bare welds or scratches to slow rust
- Check ground clearance on steep ramps and rock ledges
Specifications
| Brand | N-Fab |
|---|---|
| Part number | PRC1484CC-TX |
| Product type | Nerf bars and steps (side steps) |
| Series | Predator Pro Step System |
| Finish | Textured / matte black |
| Length | Cab length |
| Construction | Fully welded, 1-piece |
| Fitment type | Direct fit |
Vehicle fitment
Listed fitment: 2014-2018 Chevrolet Silverado 1500 (Custom, High Country, LS, LT, LTZ, SSV, WT) and 2014-2018 GMC Sierra 1500 (Base, Denali, SLE, SLT).
The list covers only the 1500 models for 2014-2018, so it does not cover the 2500 and 3500 models or other model years. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Test-fit the steps before any cutting, drilling or finishing, and work from the installation instructions included with the kit. Torque fasteners to the specified value and re-check them after the first miles of driving. If drilling is needed, wear eye protection and treat bare edges to prevent corrosion. Check local rules on vehicle modification. Make sure every fastener is tight and the steps are secure before they carry any weight.
What’s included
Two steps and all hardware necessary for installation, with vehicle-specific installation instructions.
















