Overview
The N-Fab F1730LD is a multi-mount LED light bar mount system for the 2017 Ford F-250, F-350, F-450 and F-550. It is a welded, one-piece steel bracket that bolts on without drilling and is designed to work with LED light bars from any manufacturer.
N-Fab makes tubular bumpers, tire carriers, nerf bars and other accessories for trucks, Jeeps and SUVs at its facility in Houston, Texas. This mount is finished with a zinc coating and a thick gloss black powder coat. N-Fab describes its general fabrication as using heavy gauge .084 wall steel, while this mount is listed with .095 wall tubing.
Key features
- Bolt-on installation with no drilling required
- One-piece welded construction
- Designed to work with LED light bars from all manufacturers
- Zinc coated, then powder coated in a gloss black finish
- Not for trucks equipped with the Adaptive Cruise Control box
Wiring and fitting the mount
A multi-mount system carries light bars at the front of the truck, where they take road debris, water and vibration. Keep the bar and bracket fasteners tight, and check for movement or rattling after rough driving. Look for chafed wire and loose clamps at the same time, since those problems often show up together.
Choose light bars that suit the mount’s footprint and weight. Heavier bars put more force through the bolts and welds, so spread the load evenly and avoid hanging extra lamps from the ends of the bar. Set each lamp at a height that keeps the beam clear of oncoming drivers and aimed where the road needs it.
Electrical work deserves the same care. Use a relay and fuse close to the battery, route wires away from hot exhaust and moving suspension parts, and secure harnesses with clips so they do not drag. A quick inspection of connectors after each season prevents dim or intermittent lamps.
Specifications
| Brand | N-Fab |
|---|---|
| Part number | F1730LD |
| UPC | 843206110599 |
| Product type | Multi-mount LED light bar mount system |
| Construction | All welded, one piece |
| Tubing | .095 wall tubing |
| Finish | Gloss black powder coat over zinc coating |
| Warranty | Lifetime on the product; 5 years on the finish |
| Made in | USA |
Vehicle fitment
It is for the 2017 Ford F250, F350, F450 and F550. The mount is not for trucks equipped with the Adaptive Cruise Control box.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The mount is bolt-on and requires no drilling. Before installing, confirm the truck does not have the Adaptive Cruise Control box, since the mount is not for those trucks. Wire light bars through a fused relay and follow your local rules for auxiliary lights.
What’s included
The kit covers the welded light bar mount system and its warranty. Plan to source the light bars separately.
Not included: LED light bars. The mount is designed for light bars from any manufacturer, but the lights themselves are not included.












