Overview
The N-Fab D0250LR is a roof mounted light bracket for a 50 in. light bar, using a side mount. It is finished in textured black.
N-Fab builds tubular off-road parts, from Nerf bars to pre-runners, for trucks and SUVs going back to the 80s. This bracket uses .084 wall steel with an all-welded, one-piece frame. Each part receives a zinc coat before the powder coating is applied for a long-lasting finish.
Key features
- Side mount design for roof installation
- Built for a 50 in. light bar
- .084 wall steel, all-welded and one-piece
- Zinc coated and powder coated
- The finish may be textured black or gloss black, so check which one arrives before mounting.
Choosing a roof light setup
A roof bracket carries the weight of the light bar and takes road vibration on every trip, so the mounting point matters as much as the bracket itself. Before choosing a light, measure the roof surface, confirm there is space for the bar’s wiring and brackets, and make sure the bar sits level so it does not catch wind or low branches. Side mounts like this one leave the center of the roof clear for other gear.
Roof lights are often paired with a relay harness, a switch and a fuse close to the battery. This keeps the light current off the stock circuits and gives you a single point to shut the lights off. Check wire routing for pinch points at the roof edge and door seals, and secure loose runs with clips so they do not flap at speed. Inspect bolts and welds after the first few trail trips and again every season.
Specifications
| Brand | Nfab |
|---|---|
| Part number | D0250LR |
| UPC | 843206105533 |
| Mount type | Roof, side mount |
| Light bar size | 50 in. |
| Material | Steel, .084 wall |
| Coating | Zinc coat under powder coat |
| Finish | Textured black (title) and gloss black (bullets) |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering. Check the roof mounting area for clearance before drilling.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check the drilling layout and included fasteners against your installation before starting. Route any light bar wiring through a fused relay, and check local regulations before using roof lights on public roads.
What’s included
Check the package contents against your installation before starting.
Not included: The 50 in. light bar that the bracket is designed to carry.









