Overview
The MTS Company TJFM-1 is a factory-style replacement fuel pump module for the 1997–2001 Jeep Wrangler (TJ) in SE, Sahara and Sport trims.
It is built for a 15 gallon tank and includes the pump and hanger assembly. Part number TJFM-1 is the reference to match against the module you are replacing.
Key features
- Factory-style replacement fuel pump module
- Includes pump and hanger assembly
- Designed for a 15 gallon tank
- Fitment list covers the 1997–2001 Wrangler TJ in SE, Sahara and Sport trims
Fuel pump replacement tips
An in-tank fuel pump module works by pushing fuel from the tank to the engine at steady pressure. Because the pump is submerged, it stays cool, but fuel contamination and sediment can wear the pump and clog the inlet strainer over time. On Wrangler TJ models, a worn pump often shows up as hesitation during acceleration, difficulty starting when the tank is low, or a pump that runs longer than normal before the engine starts.
Before buying, match the module to your existing unit’s connector and hanger, and check that the tank capacity fits your vehicle. When replacing the pump, it helps to clean the tank bottom of sediment and to replace the fuel filter if your system uses one. Work in a ventilated area, keep ignition sources away, and reconnect the battery only after everything is secured.
- Match the connector style before ordering
- Check the strainer for debris when the module is out
- Replace the fuel filter at the same time if equipped
- Check fuel pressure after the module is installed
Specifications
| Brand | MTS Company |
|---|---|
| Part number | TJFM-1 |
| UPC | 70000640577 |
| Type | Fuel pump module |
| Tank size | 15 gallon |
| Included | Pump and hanger assembly |
Vehicle fitment
The manufacturer fitment list covers the 1997–2001 Jeep Wrangler (TJ) in SE, Sahara and Sport trims.
Other Wrangler generations are outside this fit. Confirm fit for your vehicle’s year, model and trim before ordering, especially for Rubicon and X trims.
Installation notes
The module sits inside the fuel tank and the pump draws gasoline, so disconnect the battery and relieve fuel system pressure before removing the old unit, and work away from sparks and open flame.
What’s included
The pump and hanger assembly is included. Check your old unit for fuel lines, seals and lock rings, and have replacements ready if needed.









