Overview
The Omix-ADA 18271.06 is a spring main eye bolt and nut, a factory style replacement for the spring-to-frame connection. The bolt is Grade 8 and sized at 9/16 inch for the spring to frame. It is a direct OE replacement Jeep part built to original specifications.
Key features
- Factory style replacement
- Grade 8 bolt
- Spring main eye bolt and nut
- Direct OE replacement built to original specifications
- Covered by a limited five-year warranty
Spring eye bolt inspection
A spring eye bolt holds the leaf spring to the frame, so it carries repeated load every time the axle moves. Over time the bolt and the eye can wear, the threads can stretch, and the bushing in the eye can split. Movement or clunking at the front or rear of the spring is a common sign that the connection needs attention.
When replacing the bolt, clean the threads and inspect the frame bracket for cracks or elongated holes before fitting the new part. Use a new nut, tighten it to the value in your service procedure, and check it after the first few drives. A bolt that turns in the bracket or shows necking should be replaced rather than reused.
- Check the spring eye for cracks
- Inspect the bushing for splitting
- Replace the nut with a new one
- Recheck tightness after the first drives
Specifications
| Brand | Omix-ADA |
|---|---|
| Part number | 18271.06 |
| UPC | 804314071615 |
| Bolt grade | Grade 8 |
| Spring to frame | 9/16 inch |
| Warranty | Limited five-year warranty |
Vehicle fitment
This is a Jeep replacement part. Confirm the year and model before ordering.
Check the eye bolt size and spring-to-frame location against your Jeep before installing.
Installation notes
Compare the new bolt with the original before fitting it, since the spring to frame connection is 9/16 inch.
What’s included
One spring main eye bolt and nut.









