Overview
The Mountain Off Road Enterprises EB1 is a pair of emergency brake cables for Jeep builds that use a Ford 8.8 rear axle with disc brakes. Mountain Off Road Enterprises, also known as M.O.R.E., offers it as a conversion cable so the parking brake matches the swapped axle.
The cables are built for rugged off-road use. Because they are made for Ford 8.8 disc brake setups, they are not a general-purpose parking brake cable.
Key features
- Conversion cable for a Ford 8.8 rear axle with disc brakes
- Direct bolt-in fit
- Sold as a pair
- Rugged construction for off-road use
Choosing the right cable setup
A conversion parking brake cable has to match the axle it serves. On a Ford 8.8 with disc brakes, the cable runs from the lever to the rear caliper hardware, so its length, end fittings and routing all need to suit that layout. Cables made for drum brakes use a different actuator, so mixing the two will not work.
Off-road use puts cables under strain from mud, rocks and repeated cycling. Check the outer housing for kinks or cracked boots, and make sure the inner cable slides freely without binding. Corrosion at the ends is common on trail vehicles, so a light coat of grease at the pivots keeps the lever action smooth and predictable over time.
- Check the lever and cable ends for rust
- Look for kinks in the housing after rough trails
- Replace both sides together for even braking
Specifications
| Brand | Mountain Off Road Enterprises |
|---|---|
| Product number | EB1 |
| UPC | 815572021618 |
| Application | Ford 8.8 rear axle, disc brake only |
| Quantity | Pair |
| Installation | Direct bolt-in |
Vehicle fitment
It is made for Jeep builds fitted with a Ford 8.8 rear axle and disc brakes. Confirm the axle and brake setup, since no model years or chassis codes apply to this cable.
The cable is for Ford 8.8 disc brake setups only. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Confirm the Ford 8.8 axle and disc brake setup before fitting the pair, since the cable is made for that conversion only. Support the vehicle on stands before working near the rear brakes.
What’s included
A pair of emergency brake cables. Clips, brackets and mounting hardware may be needed during installation.








