Overview
The MasterTop Windshield Header, part number 14700001, is a pre-assembled header that attaches MasterTop Bimini tops and Bimini Top Plus tops to a Jeep. These tops need a windshield header for proper attachment, and this header serves that purpose.
The header arrives ready for installation. Take it out of the box and attach it to the Jeep with the two enclosed thumb screws. Drilling is required. The fit is custom, designed for a weather tight, noise-free seal.
Key features
- Pre-assembled, ready to attach out of the box
- Required for Bimini Top and Bimini Top Plus installation
- Custom fit design for a tight, noise-free fit
- Attaches with two enclosed thumb screws
- Drilling is required for installation
Before you drill
Drilling is the step that decides how the header sits, so mark the location carefully and dry-fit the header before committing. Check that the mounting area is clear of wiring, hardware and body panels behind the surface. Once holes are made the position cannot be changed, so take time with the layout and measurements.
Bimini tops carry wind load, and a header that is off-center or loose can pull on the top’s attachment points. Snug the thumb screws evenly so the header sits level, then check it after the first drive. Keep the thumb screws and holes free of corrosion, and inspect the header for cracks if the top flexes in wind. Keep the top stored dry when not in use so the fabric does not stretch.
- Mark and dry-fit before drilling
- Use a sealant suited to the surface if the holes are exposed
- Recheck the thumb screws after the first few drives
Specifications
| Brand | MasterTop |
|---|---|
| Part number | 14700001 |
| UPC | 818068020584 |
| Compatible tops | MasterTop Bimini tops and Bimini Top Plus tops |
| Attachment hardware | Two enclosed thumb screws |
| Installation | Drilling required |
| Warranty | 3 year limited |
Vehicle fitment
It is made for Jeep use with MasterTop Bimini and Bimini Top Plus tops. Confirm the model year and chassis code for your Jeep before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Drilling is required, so confirm the mounting location before you start. The header is already assembled, so the work is mounting it and fastening it with the two thumb screws.
What’s included
One pre-assembled windshield header with two enclosed thumb screws.
Not included: the MasterTop Bimini top or Bimini Top Plus, which this header is required to attach.














