Overview
The MasterTop 14700101 is a two-piece windshield channel required for Bimini Top and Bimini Top Plus installation. It fits 1976–1986 Jeep CJ7, 1981–1985 Jeep Scrambler and 1987–1995 Jeep Wrangler (YJ) models.
The channel is pre-drilled to fit the factory windshield mount holes and comes with all required hardware. Each channel is powder coat painted and designed for a weather tight, noise-free fit.
Key features
- Pre-drilled to fit factory windshield mount holes
- Two-piece channel with all required hardware
- Powder coat painted
- Custom fit design for a tight, noise-free fit
- 3 year limited warranty
Before you install
A windshield channel gives a soft top a rigid, sealed edge to attach to, so the top holds its shape at speed and in wind. Because the channel sits in the factory mount holes, the windshield frame carries the load. Before buying, confirm the top model, since Bimini Top and Bimini Top Plus fit depends on matching the channel to the top’s frame.
Once installed, check the seal and the top’s tension periodically. Look for gaps along the channel, loose fasteners, and wear where the top fabric rubs the edge. Clean the channel with mild soap and water, and avoid harsh solvents on the powder coat finish. Address any shifting before the next trip, since a loose top can flap and damage stitching.
- Check the seal after the first few trips
- Inspect fabric where it meets the channel
Specifications
| Brand | MasterTop |
|---|---|
| Part number | 14700101 |
| UPC | 818068020560 |
| Pieces | Two-piece channel |
| Finish | Powder coat paint |
| Drilling | Drilling not required |
| Required for | Bimini Top and Bimini Top Plus |
| Warranty | 3 year limited |
Vehicle fitment
It fits 1976–1986 Jeep CJ7 (several trims including Golden Hawk), 1981–1985 Jeep Scrambler and 1987–1995 Jeep Wrangler (YJ). Confirm your vehicle’s year, model and trim before ordering, since Wrangler TJ and JK models fall outside these year ranges.
Wrangler TJ and JK models are not in this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the channel is pre-drilled to the factory mount holes, drilling is not required. Check that the channel seats evenly before securing the Bimini top.
What’s included
Two-piece windshield channel with all required hardware.
Not included: the Bimini top itself, since the channel is a required component for Bimini Top and Bimini Top Plus installation.









