Select your vehicle

LUND 5 Inch Oval Straight Tube Steps – 24010561

Lund

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Fits 2007 to 2019 Silverado and 2007 to 2018 Sierra trucks, 1500 through 3500 HD
  • Part number LII24010561, Lund 5 inch oval straight tube steps
  • Marine-grade 305L stainless steel construction
  • Supports up to 300 pounds before flexing and 350 pounds before bending

Description

Overview

The Lund 5 Inch Oval Straight Tube Steps, part number LII24010561, are stainless steel side steps for Chevrolet Silverado and GMC Sierra pickups. Lund lists them for 2007 to 2018 Silverado and Sierra 1500 trucks, 2007 to 2019 Silverado 2500 HD and 3500 HD trucks, and 2007 to 2018 Sierra 2500 HD and 3500 HD trucks.

The bars are made from marine-grade 305L stainless steel, with a smooth, uniform bend designed for safe, sure footing in and out of a truck or SUV. They are rated to support up to 300 pounds before flexing and 350 pounds before bending.

Key features

  • Oval straight tube profile in a 5 inch size
  • Marine-grade 305L stainless steel construction
  • Smooth, uniform bend designed for safe, sure footing
  • Supports up to 300 pounds before flexing and 350 pounds before bending
  • Designed as a direct fit for the covered trucks

Care for stainless steps

Stainless steel steps resist rust well, but road salt, grit and mud can still build up in the bends and mounting joints. A regular rinse with fresh water removes most of the buildup. Use a soft brush for stubborn grime and avoid steel wool, which can leave tiny scratches that trap dirt. Drying the bars after wet trips helps keep the surface looking consistent.

Check the mounting hardware every few months and after rough trail use. Look for loose clamps, signs of galvanic wear where different metals meet, and cracks or dents in the tube near the bends. Tighten fasteners to the correct torque for your bracket kit, and replace any worn bolts. A bar that moves under load should be inspected before further driving.

Specifications

Brand Lund
Part number LII24010561
Profile 5 inch oval, straight tube
Material Marine-grade 305L stainless steel
Load rating Up to 300 pounds before flexing; 350 pounds before bending
Fitment type Direct Fit

Vehicle fitment

The bars fit 2007 to 2018 Chevrolet Silverado 1500 and GMC Sierra 1500 pickups, 2007 to 2019 Chevrolet Silverado 2500 HD and 3500 HD trucks, and 2007 to 2018 GMC Sierra 2500 HD and 3500 HD trucks. Trim coverage differs by model, so check the trim on your truck.

Trucks outside those years, including 2019 Silverado and Sierra 1500 models and Colorado or Canyon, are not on this list. Confirm your vehicle’s year, model and trim before ordering.

What’s included

Check the package contents against your installation before fitting.

Fitment

VehicleYearsTrims
Chevrolet Silverado 15002007–2018Custom, High Country, Hybrid, LS, LT, LTZ, SSV, WT, XFE
Chevrolet Silverado 2500 HD2007–2019High Country, LT, LTZ, WT
Chevrolet Silverado 3500 HD2007–2019High Country, LT, LTZ, WT
GMC Sierra 15002007–2018Base, Denali, Hybrid, SL, SLE, SLT, WT, XFE
GMC Sierra 2500 HD2007–2018Base, Denali, SLE, SLT, WT
GMC Sierra 3500 HD2007–2018Base, Denali, SLE, SLT, WT

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Will the Lund LII24010561 fit a 2007 Chevrolet Silverado 1500?

Yes. The bars fit 2007 to 2018 Silverado 1500 trucks, which includes 2007. Trims such as LS, LT and LTZ are covered for that model, so check your truck's trim before choosing this part.

Does this part cover a 2019 Silverado 1500?

No. The 1500 models for Silverado and Sierra are covered through 2018. The 2019 Silverado 2500 HD and 3500 HD trucks are covered instead.

What material are these LUND steps made from?

The bars are made from marine-grade 305L stainless steel, with a smooth, uniform bend. They are rated to support up to 300 pounds before flexing and 350 pounds before bending, which suits regular use on the covered trucks.

How much weight do the steps support?

Up to 300 pounds before flexing and 350 pounds before bending. Compare these figures with your own needs before relying on the bars for heavy loads, and keep weight distribution in mind when climbing in.

How do I tell if a step needs replacing?

Replace a step when the tube is bent, cracked, or deeply dented, or when a bracket shows cracks or heavy rust. A bar that feels loose under body weight also needs attention. Small scratches and surface dulling are normal wear and usually do not need replacement.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon