Overview
The Lund LII22858783 is a 5-inch oval bent tube nerf bar in chrome, a side step that helps drivers climb into a Dodge Ram or Ram pickup. Nerf bars, also called running boards or side steps, give a raised step between the ground and the cab so the truck is easier to reach. The bars fit Ram 1500, 2500 and 3500 trucks from 2009 through 2026, with year and trim limits set out below.
The bars use a polymer material set inside a lightweight, durable aluminum frame that is designed to resist rust and corrosion. Each bar has a broad stepping area that is larger than traditional step bars, and they come in 80-inch and 87-inch wheel-to-wheel lengths.
Key features
- Recessed step area with UV-resistant rubber grip pads for solid traction and stability
- Polymer material set within a lightweight, durable aluminum frame
- Broad stepping area, larger than traditional step bars
- Oval tube with a curved bent style and a chrome-plated finish
- Pre-assembled bars that come with custom mounting hardware
- Available in 80-inch and 87-inch lengths, wheel to wheel
- Limited lifetime warranty from Lund
Keeping chrome bars looking new
Chrome plating protects the steel or aluminum base, but it can dull when road salt, mud and brake dust sit on the surface. Rinse the bars after winter driving and wash them with a pH-neutral soap. Avoid abrasive pads, which can scratch the plating and expose the base beneath it. A microfiber cloth lifts grime without leaving marks.
The rubber grip pads and the aluminum frame need checks too. Look for cracked or loose pads, and make sure the recessed areas stay free of grit. Inspect the bracket bolts after the first few trips, then each season. Tighten any fastener that has backed off, and replace bolts that show rust or thread damage. A quick look at the plating for chips or bubbling shows when the finish needs attention.
Specifications
| Brand | Lund |
|---|---|
| Part number | LII22858783 |
| Finish | Chrome |
| Profile | 5-inch oval, bent tube |
| Length | Wheel to wheel, with 80-inch and 87-inch options |
| Material | Polymer set in a lightweight aluminum frame |
| Mounting | Custom hardware included, no drilling |
| Warranty | Limited lifetime |
Vehicle fitment
The bars fit these Dodge and Ram pickups: 2009–2010 Dodge Ram 1500; 2010 Dodge Ram 2500 and 3500; 2011–2015 Ram 1500; and 2011–2026 Ram 2500 and 3500.
The list does not cover the Ram 1500 from 2016 onward, the Ram 1500 Classic, or any Dodge Ram from 2002 to 2008. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The bars arrive pre-assembled, and the included brackets mount them without drilling. Because the brackets are made for a specific make and model, check that they match your truck before you start. Set the parking brake and work on level ground before fitting the bars.
What’s included
Each set includes the pre-assembled nerf bars and the custom mounting hardware for a direct install.









