Overview
The K&N Universal X-Stream Clamp-on Filter (Natural), part number K/NRU-4960XD and model RU-4960XD, is a clamp-on air filter for universal-fit intakes. It belongs to K&N’s universal line, which is made for racing vehicles, radio-controlled cars, generators, snowmobiles, tractors and other equipment rather than a single vehicle.
K&N describes its molded rubber flange as ultra-strong and pliable. The flange absorbs vibration, locks onto the intake snugly, and can stretch up to 1/16 inch (1.5mm) to suit intake sizes that fall between standard sizes. The filter can be washed and used again.
Key features
- Clamp-on style for universal-fit intakes
- Universal fit for a wide range of intake openings
- Molded pliable rubber flange that absorbs vibration
- Stretches up to 1/16 inch (1.5mm) for in-between sizes
- Washable and reusable
Clamp-on fit and seating
A clamp-on filter is positioned by its clamp and held by its rubber flange, so the seating step decides how well the filter performs. Start by setting the flange evenly around the intake opening, then tighten the clamp gradually. A crooked seat lets air pass the edge of the filter and can pull dust straight toward the engine.
Clamp-on filters often sit close to other parts, so check clearance to hoses, wiring and body panels before final tightening. After cleaning, look for flattened rubber or a clamp that no longer holds the flange square. Those signs mean the seal needs attention before the filter goes back in service. Retighten the clamp after the first short run, since rubber can settle slightly once it has been heated.
- Seat the flange evenly
- Tighten the clamp gradually
- Check clearance to hoses and wiring
- Inspect the flange after cleaning
Specifications
| Brand | K&N |
|---|---|
| Part number | K/NRU-4960XD |
| Model | RU-4960XD |
| Type | Universal clamp-on air filter |
| Flange | Molded pliable rubber, stretchable up to 1/16 in (1.5 mm) |
| Finish | Natural |
| Fitment | Universal Fit |
Vehicle fitment
It is marked Universal Fit and is not sized to one make, model or year. Choose it by the intake opening diameter and offset, using the flange’s stretch of up to 1/16 inch (1.5mm).
Size differences beyond the 1/16 inch (1.5mm) stretch range are outside what the flange can cover.
Installation notes
Measure the intake opening and offset first, then seat the flange evenly before tightening the clamp so the seal stays square.
What’s included
The product is the K&N universal X-Stream clamp-on air filter. No accessories are listed.









