Overview
The K&N RU-5288 is a universal clamp-on air filter for applications where the intake angle or offset diameter does not match a standard fitting. K&N builds its universal filters for generators, tractors, snowmobiles and radio-controlled cars, so this clamp-on model is not designed around one vehicle.
The rubber clamp-on flange holds the filter and absorbs vibration. It is ultra-strong and pliable, can stretch up to 1/16 of an inch (1.5mm) for in-between sizes, and the filter is washable and reusable.
Key features
- Universal clamp-on design with rubber flange
- Flange is ultra-strong, pliable and absorbs vibration
- Stretches up to 1/16 of an inch (1.5mm) for in-between sizes
- Washable and reusable
Clamp-on filters and intake sealing
A clamp-on filter relies on its flange for both position and seal. When the flange grips the intake evenly, dirt has to pass through the filter media instead of around the edge. Uneven seating, a torn lip or a flange stretched past its limit can all let unfiltered air reach the engine, so seating deserves as much attention as the filter itself.
Tighten the clamp evenly and avoid twisting the filter while seating it. Rubber that has taken a set from repeated stretching may no longer grip, so inspect the flange during every cleaning. Pair the filter with a clean intake tube and a sealed housing, since a dirty tube can carry grit past even a good filter.
- Seat the flange square to the intake
- Inspect the flange after each cleaning
- Keep the intake tube free of grit
- Replace a flange that no longer grips
Specifications
| Brand | K&N Filter |
|---|---|
| Part number | K/NRU-2815 |
| Model (title) | RU-5288 |
| Type | Universal clamp-on air filter |
| Flange material | Ultra-strong molded pliable rubber |
| Flange stretch | Up to 1/16 of an inch (1.5mm) |
| Cleaning | Washable and reusable |
Vehicle fitment
It is a universal fit filter, so no specific vehicle is assigned. Check the intake’s angle and offset diameter against the flange before ordering.
It is a universal fit filter, so no specific vehicle is assigned. Check the intake’s angle and offset diameter against the flange before ordering. Order part number K/NRU-2815 for model RU-5288, and confirm your vehicle’s year, model and trim before ordering.
Installation notes
The clamp-on flange is the mounting method. Stretch it only as far as the 1/16 of an inch (1.5mm) allowance the brand gives for between-size fits.
What’s included
The RU-5288 universal clamp-on air filter. No other accessories are described.











