Overview
The K&N 57-2557 is a 57 Series performance air intake kit from K&N Filter, part number 57-2557, designed as a cold air intake. K&N describes its intake systems as able to replace the factory airflow assembly, including the filter, air box and air path, and this kit includes a high density polyethylene inlet tube.
The kit is a Direct Fit intake, with no vehicles named. Confirm fit for your vehicle’s year, model and trim before installing it. The estimated gain is 8 HP.
Key features
- Cold air intake with a partial enclosure filter housing
- Free-flowing high density polyethylene inlet tube
- Washable and reusable oil-type filter, described by K&N as a lifetime filter
- K&N estimates a gain of 8 HP
- Backed by K&N’s Million Mile Warranty
- Made in the USA
- 50 State Legal with CARB EO# D-269-31
- K&N says installation usually takes 90 minutes or less
Care and cleaning routine
A reusable oil filter pays off only when it is cleaned on time. Work from the clean side out: tap loose dust out first, then wash with a cleaner made for the filter type. Let it dry completely before adding oil, since wet media holds too much and can send oil toward the sensor.
The high density polyethylene tube is durable but can crack under heat or after impacts. Feel for stiff or brittle spots during service, and replace a tube that has splits near a clamp. Keep a spare set of clamps on hand so an inspection stop does not turn into a longer job.
- Wash the filter when it is dirty rather than on a fixed time
- Let the filter fully dry before oiling
- Replace the tube if it cracks near a clamp
Specifications
| Brand | K&N Filter |
|---|---|
| Part number | 57-2557 |
| UPC | 24844109484 |
| Series | 57 Series |
| Intake type | Cold air |
| Filter housing type | Partial enclosure |
| Filter type | Oil, washable and reusable |
| Inlet tube | Included, high density polyethylene (HDPE) |
| Estimated horsepower gain | 8 HP (K&N estimate) |
| Emissions certification | CARB EO# D-269-31; 50 State Legal |
| Country of manufacture | USA |
| Warranty | K&N Million Mile Warranty |
| Installation time | Usually 90 minutes or less (K&N) |
Vehicle fitment
No vehicles are named for the K&N 57-2557. Its fitment is shown only as Direct Fit, with no year, make, model or chassis code. Confirm your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Installation usually takes 90 minutes or less. Make sure your vehicle’s year, model and trim match this kit before starting the installation.
What’s included
The kit includes a high density polyethylene inlet tube. Check the remaining parts against the box contents before starting the installation.
Not itemized: Confirm each remaining part is present before you begin the installation.









