Overview
The KC HiLites Gravity LED Pro6 8-light combo light bar (part number 91313) is an LED off-road lighting kit for the 2007–2018 Jeep Wrangler JK, including 2- and 4-door models. It pairs the Pro6 light bar with Gravity LED G6 optics and a patent-pending Infinity Ring system that sets the bar straight or in a radius shape.
The Pro6 uses KC’s modular design, which can be expanded to different widths. The kit includes mount brackets, hardware and a Deluxe Plug-N-Play wiring harness with a 30 amp LED switch, so the bar, mounting and wiring come together in one kit. The system runs high output with low amperage draw.
Key features
- Patent-pending Infinity Ring system converts the Pro6 from straight to radius configuration in seconds
- Gravity LED G6 optics with a patented design
- G6 optics available in Spot, Driving and Wide-40 beam patterns
- Signature KC modular design, expandable to different widths
- High output with low amperage draw
- Deluxe Plug-N-Play wiring harness with 30 amp LED switch
Wiring a high-draw bar
A bar that draws this much power needs more careful wiring than a small auxiliary light. Use the harness with the 30 amp switch as the main control, and keep the feed fused close to the battery. Wire the switch somewhere you can reach from the driver seat so the lights can be turned off quickly.
Straight and radius configurations change how the light is arranged across the front. A straight bar gives a flatter, longer pattern, while a radius shape spreads the light differently. Choose the shape that fits the terrain you drive most, and remember that the Infinity Ring can be changed without removing the bar.
Before adding anything else to the circuit, check the total load on the harness and the fuse. Extra lights added later can overload the same wiring, so plan any future expansion from the start, including the modular widths the Pro6 can take.
- Fuse the feed close to the battery
- Keep the switch within reach of the driver
- Check total load before adding lights
Specifications
| Brand | KC HiLites |
|---|---|
| Part number | 91313 (also written K/C91313) |
| UPC | 84709913137 |
| Product line | Gravity LED Pro6 8-light combo |
| Optics | Gravity LED G6 |
| Beam patterns | Spot, Driving, Wide-40 |
| Raw lumens | 19,616 lm |
| Lux at 10 meters | 8,850 lx |
| Candela | 885,000 cd |
| Beam distance | 941 m |
| Power | 160 watts |
| Switch | 30 amp LED switch in wiring harness |
| Included hardware | Mount brackets and hardware |
Vehicle fitment
The Gravity LED Pro6 fits the 2007–2018 Jeep Wrangler (JK), including the 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X trims, plus the Unlimited versions of those trims.
Wrangler JL models (2018–2022), along with earlier TJ and LJ Wranglers, are not in this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The Infinity Ring lets you switch between straight and radius shapes, which KC describes as taking seconds. The harness is plug-and-play and includes the 30 amp LED switch, so wire the kit with that harness and a fused circuit. The bar draws 160 watts, so check local rules before using it on public roads.
What’s included
The kit includes the Pro6 LED light bar, mount brackets and hardware, and a Deluxe Plug-N-Play wiring harness with 30 amp LED switch.






















