Overview
The H3R Performance NB425 is an Extreme Duty quick release bracket for 4.25 inch diameter fire extinguishers, built for off-road and racing use. It works with H3R MX500 and HG500 extinguishers, which are sold separately, and it mounts on an H3R seat mount or a flat surface.
The bracket is built for speed, because fast action matters when a fire extinguisher is deployed, while it holds up to rough use. It suits off-road and racing vehicles, and the design is patent pending.
Key features
- Quick release for 4.25 inch diameter extinguishers
- Works with H3R MX500 and HG500 extinguishers
- Fiberglass reinforced nylon construction
- Corrosion resistant hardware
- Rated by H3R to withstand inertial loads above 18G in all directions
- Meets MIL SPEC 810G
- Extinguisher cannot accidentally disengage from the bracket
- Includes a Pull To Release flag
Mounting and extinguisher choice
A quick release bracket is only as good as the surface it mounts to. Choose a spot that can take the load of the extinguisher during a hard stop or a rollover, and that keeps the handle within easy reach from the seat. A seat mount or a stiff flat panel gives the most secure hold, and it keeps the cylinder clear of hot exhaust parts and sharp edges.
The bracket is only one part of the system, so the extinguisher itself needs regular checks. Look at the gauge, the seal and the pull pin on a set schedule, and replace the unit after any discharge. Make sure the extinguisher matches the 4.25 inch diameter and the bracket’s compatible models before mounting.
- Keep the handle within reach from the seat
- Check gauge and pull pin regularly
- Replace after any discharge
Specifications
| Brand | H3R Performance |
|---|---|
| Part number | NB425 |
| UPC | 856991001485 |
| Extinguisher diameter | 4.25 inch |
| Compatible extinguishers | H3R MX500, H3R HG500 |
| Construction | Fiberglass reinforced nylon |
| Hardware | Corrosion resistant |
| Inertial load rating | Above 18G in all directions |
| Standard | MIL SPEC 810G |
| Weight | 15 oz |
| Mounting | H3R seat mount or flat surface |
Vehicle fitment
It is a universal fit bracket that attaches to an H3R seat mount or any flat surface strong enough to hold the bracket and extinguisher securely. Confirm your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Mount the bracket to an H3R seat mount or a flat surface that is solid enough to hold the extinguisher under load. Choose an extinguisher model that matches the 4.25 inch diameter, since the extinguishers are sold separately.
What’s included
The bracket with corrosion resistant hardware and a Pull To Release flag.
Not included: the fire extinguisher, which is sold separately.














