Overview
The H3R Performance HG250C is a 2.5 lb HalGuard hand-held fire extinguisher. Its clean agent is electrically non-conductive and rapidly turns into a gas when discharged.
The agent has passed testing by Underwriters Laboratories and meets FAA requirements. The same type of agent is found on commercial aircraft and is used by airport fire fighters and on the flight line.
HalGuard extinguishers come in compact 1.4 lb and 2.5 lb sizes, and in larger 5 lb, 11 lb and 15.5 lb units. The larger sizes are USCG approved and meet DOT requirements for the heavy duty truck market, and 65 lb and 150 lb wheeled units are made for the pit lane or large facilities.
Key features
- Electrically non-conductive clean agent
- Agent that rapidly turns into a gas
- Underwriters Laboratories testing
- Meets FAA requirements
- 2.5 lb hand-held size
Checking an extinguisher in the vehicle
A clean agent extinguisher is a hand-held unit meant for quick use on small fires in a cab or cargo area. Good placement means the unit is reachable from the driver’s seat, away from direct sun and engine heat, and firmly mounted so it cannot roll or come loose. Because the unit is for emergencies, a quick check of its condition at regular intervals is a sensible habit.
Inspect the gauge, the pin, the tamper seal and the hose or horn for damage, cracks or corrosion. A gauge that has dropped out of the normal zone means the unit needs service. Any discharge, even a short one, means the unit should be serviced or replaced before it goes back in the vehicle. Making sure everyone who rides along knows where the extinguisher is also worthwhile.
- Check the gauge on a regular schedule
- Keep the pin and tamper seal intact
- Mount away from direct sun and engine heat
Specifications
| Brand | H3R Performance |
|---|---|
| Part number | HG250C |
| UPC | 856991001072 |
| Product line | HalGuard |
| Agent | Clean agent, electrically non-conductive |
| Size | 2.5 lb |
| Type | Hand-held |
| Approvals | Underwriters Laboratories tested; meets FAA requirements |
Vehicle fitment
This extinguisher is not vehicle-specific, so it has no vehicle fitment. Choose a mounting spot in the cab or cargo area that keeps the 2.5 lb unit within reach and secured.
Installation notes
Mount the unit where it can be reached quickly and secured so it does not come loose on rough trail.
What’s included
The 2.5 lb HalGuard extinguisher. No accessories or mounting bracket are listed.






















