Overview
The Go Rhino SR40 Series Roof Rack, part number 5921145T, is a steel roof rack that includes four Rigid Industries 3 in LED lights. The SR40 is a new, sleeker version of the SR rack.
It is a universal fit rack that is not tied to any particular year or model.
Key features
- Four Rigid Industries 3 in LED lights included
- New, sleeker version of the SR rack
- Steel roof rack construction
- Universal fit design
Wiring the included LED lights
Auxiliary LED lights draw more current than a standard accessory circuit should carry, so wire them through a fuse and relay rather than tapping a vehicle circuit directly. Place the switch where it is easy to reach from the driver’s seat. Route the wiring along the rack and through a grommet at any panel, keeping cables clear of moving parts, exhaust heat and sharp edges.
Test the lights on the bench before mounting them to the rack, and check beam direction and clearance from the roof. Recheck the connections after the first few trips, since vibration can loosen terminals. Check local road-use rules for auxiliary lights before driving, because some areas limit where and when they can be used.
- Use a fuse and relay for each light set
- Seal connections against water
- Inspect wiring for chafing after rough trails
Specifications
| Brand | Go Rhino |
|---|---|
| Series | SR40 |
| Part number | 5921145T |
| UPC | 887753104540 |
| Material | Steel |
| Lights | Four Rigid Industries 3 in LED |
| Roof rack type | Roof rack |
| Fitment | Universal fit |
Vehicle fitment
Fit is universal rather than vehicle-specific, so check the mounting against your roof before ordering.
Confirm your vehicle’s year, model and trim before ordering. Check the mounting points for your roof before installing.
Installation notes
The four LED lights come with this version, so wire them through a fuse and relay and check local road-use rules for auxiliary lights.
What’s included
The SR40 roof rack with four Rigid Industries 3 in LED lights.









