Overview
The Garvin Industries Adventure Half Rack, part number GRV20099, is a 60-inch aluminum roof rack for the 2018–2019 Jeep Wrangler JL Unlimited four-door models with a factory hard top installed. It is designed to carry gear while keeping the front hard top sections removable.
Garvin rates the rack for up to 300 lbs of gear while off roading and for a static weight limit of 600 lbs. It mounts with no drilling, and the top of the rack sits 7.75 inches above the top of the factory hard top rain gutter. The rack has a zinc powder coat primer under a black light textured top coat. Garvin also points to its Yakima crossbar kit (#44085) for roof top tents and other Yakima-compatible products; that kit is a separate item, and the rack comes without cross bars.
Key features
- Four-plank aluminum rack, 60 inches long, with a 2-inch height
- No drilling required for installation
- Rated for 300 lbs of gear while off roading and 600 lbs static
- Leaves the front hard top sections removable.
- Black powder coat over zinc powder coat primer
- Works with roof top tents and other Yakima-compatible products when paired with crossbar kit #44085, which is sold separately.
Loading the roof rack
A roof rack on a Wrangler sits high, so loads should be balanced side to side and kept low. Place heavier items near the center of the rack and strap them down so they cannot shift. Wind noise can increase at highway speeds, so secure loose items and check tie-downs after the first mile.
Aluminum racks need only basic care. Wash the finish with mild soap, rinse off trail grit, and check fasteners after rough trips. Inspect the rack for scratches in the black finish, since exposed metal can start to corrode over time. Keep the factory hard top panels clean to prevent debris from building up near the rack edges.
- Keep heavy gear low and centered
- Use tie-down straps rated for roof loads
- Wash the rack after trips near salt or mud
Specifications
| Brand | Garvin Industries |
|---|---|
| Part number | GRV20099 |
| Rack type | Roof rack, four planks |
| Length | 60 inches |
| Height | 2 inches |
| Top height above hard top rain gutter | 7.75 inches |
| Material | Aluminum |
| Finish | Black powder coat: zinc powder coat primer with black light textured top coat |
| Off-road gear capacity | 300 lbs |
| Static weight limit | 600 lbs |
| Installation | Drilling not required |
| Cross bars included | No |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2018–2019 Jeep Wrangler JL Unlimited Moab, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport and Unlimited Sport S, all four-door models, with the factory hard top installed.
Two-door JL models and earlier JK generations are outside this fit. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The rack mounts without drilling, so no holes are added to the hard top. It requires the factory hard top to be installed, so check that before mounting. Keep loads within the 300 lb off-road rating when driving on rough trails.
What’s included
Four aluminum planks with a black powder coated finish, mounted without drilling. Cross bars are not included.
Not included: cross bars, and the Yakima crossbar kit (#44085) that Garvin references as a separate item.









