Overview
The FUEL Off-Road Sledge D595 in 20 x 9 inches is an aluminum wheel with one listed bolt pattern, 6 on 135. Part number MHTD59520909857 identifies this 20 inch model in the Sledge line.
Offset 20 and backspacing 5.75 are the measurements to compare with your hub and clearances. Measure the hub bore on your vehicle before choosing this wheel.
Key features
- Sledge style with a black finish
- Aluminum construction
- 20 inch diameter and 9 inch width
- Single bolt pattern: 6 on 135
- Offset 20 and backspacing 5.75
Hub bore and centering
Center bore is the hole that fits over the hub’s centering point. When the bore is larger than the hub, the wheel depends on the lug studs to center it, which can cause vibration. Measuring the hub with calipers before fitting shows whether a hub-centric ring is needed.
Hub-centric rings fill the gap between a larger wheel bore and a smaller hub, so the hub carries the centering load. Use rings only when their sizes match the two diameters. Once mounted, spin the wheel and watch for wobble, then check torque again after initial driving.
- Measure the hub with calipers
- Match ring size to bore and hub
- Confirm the lug nuts seat evenly
- Watch for wheel wobble at low speed
Specifications
| Brand | FUEL Off-Road |
|---|---|
| Part number | MHTD59520909857 |
| Wheel diameter | 20 inches |
| Wheel width | 9 inches |
| Offset | 20 |
| Backspacing | 5.75 |
| Style | Sledge |
| Finish | Black |
| Bolt pattern | 6 on 135 |
| Construction | Aluminum |
Vehicle fitment
This wheel is not matched to a make, model or year.
Check the 6 on 135 pattern and offset 20 against your own vehicle’s specifications before choosing this size. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because no center bore is listed, have the hub bore confirmed before mounting. A wheel that does not seat flat against the hub should not be driven.
What’s included
Only the wheel is described; no tire, lug hardware or valve stem is mentioned.
Not included: tires and lug hardware.











