Overview
The FUEL Off-Road Blitz D673 Wheel, 22×10, part number MHTD67322008947, is an aluminum split spoke wheel in Black/Milled finish. It uses a 6 on 135 bolt pattern with a negative offset of -18, an 87 center bore and 4.8 backspacing.
This is a 22 inch wheel with a 10 inch width. It carries Universal Fit and names no vehicles, so check the 6 on 135 pattern and center bore against your hub first.
Key features
- 22 inch diameter and 10 inch width
- Split spoke design in Black/Milled finish
- Negative offset of -18
- 6 on 135 bolt pattern with 87 center bore
Hub fit and clearance checks
Before mounting a split spoke wheel, the hub and the wheel must match exactly. The center bore should fit the hub so the wheel is located by the hub rather than only by the lug studs, and the bolt pattern must match the stud layout. Adding spacers or adapters changes offset and clearance, so measure again after any change.
Clearance should be checked with the tire mounted and the steering turned to both locks. Brake calipers, control arms and fender edges are the usual contact points on a large-diameter wheel. Rubbing can wear tires and damage components, so check clearance before a longer drive.
- Torque lug nuts in a star pattern
- Re-check torque after the first drive
- Keep wheel weight balanced and clean
Specifications
| Brand | FUEL Off-Road |
|---|---|
| Part number | MHTD67322008947 |
| Wheel diameter | 22 Inches |
| Wheel width | 10 Inches |
| Offset | -18 |
| Center bore | 87 |
| Backspacing | 4.8 |
| Bolt pattern | 6 on 135 |
| Style | Split Spoke |
| Finish | Black/Milled |
| Construction | Aluminum |
| Fitment label | Universal Fit |
Vehicle fitment
No vehicle is named. The Universal Fit label means bolt pattern, offset and center bore decide compatibility.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Measure the -18 offset and 4.8 backspacing against your suspension and brake clearance before mounting.
What’s included
The Black/Milled wheel described above.
Not included: Tires are not supplied and must match the 22 inch diameter and 10 inch width.











