Overview
The FUEL Off-Road Beast D564 is an 18×9 aluminum spoke wheel, part number MHTD56418901750, with an 8 on 170 bolt pattern and a machined black finish with dark tint. Its 125 center bore is the first measurement to match against your hub.
The Universal Fit label is attached to this wheel with no vehicle named alongside it. Start narrowing down a truck or SUV from the bolt pattern and offset rather than from the label.
Key features
- Spoke design in a 9 inch width
- 8 on 170 bolt pattern
- 125 center bore for hub fit
- Offset of 1 with backspacing of 5
- Black machined finish with dark tint
Choosing offset and backspacing
Offset and backspacing decide where the wheel sits in the fender and how close it comes to the brake caliper and suspension. A wheel with the same diameter can clear one truck and rub on another, so these figures matter as much as the bolt pattern. Measure your current wheels against your vehicle’s factory measurements before committing to a new offset. Wheel spacers and hub adapters change the effective offset, and each one adds load to the wheel studs, so consider them carefully before adding them.
Lug nut seat type matters as much as bolt pattern. Match the seat style of the lug nuts to the wheel’s bore holes before tightening, since mismatched seats can loosen over time. After the first few drives, recheck torque on the lug nuts and inspect the wheel for cracked spokes or bent edges after hard trail use. Aluminum spoke wheels can crack from impacts, so a pothole or rock strike warrants a close look. Keep the tires balanced, because a heavier wheel and tire combination changes how steering and wheel bearings respond.
Specifications
| Brand | FUEL Off-Road |
|---|---|
| Part number | MHTD56418901750 |
| Model | Beast D564 |
| Wheel diameter | 18 Inches |
| Wheel width | 9 Inches |
| Bolt pattern | 8 on 170 |
| Center bore | 125 |
| Offset | 1 |
| Backspacing | 5 |
| Style | Spoke |
| Finish | Machined, black with dark tint |
| Construction | Aluminum |
Vehicle fitment
No make, model or year is attached to this wheel. Confirm the 8 on 170 pattern against your hub first, since the Universal Fit label does not identify which trucks or SUVs use it.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Verify the 8 on 170 bolt pattern and 125 center bore against the hub before mounting the wheel.
What’s included
One 18×9 wheel is described.
Not included: No tire, lug hardware or center cap is named.









