Overview
The Fox Racing Shox tie rod mounting clamp, part number 803-02-039, is an aluminum clamp measuring 1 5/8 in. It is universal fit, so it is not tied to one vehicle.
It is a single clamp for the tie rod assembly, so the size is the main measurement to compare.
Tie rod clamp fit and wear
A tie rod clamp holds the tube or sleeve in place and keeps the tie rod from moving under steering load. Because it is a single clamp, its fit depends on the tie rod diameter and the clamping surface. Loose or oversized fit can let the rod rotate or slip, which affects steering precision.
Look for shiny rubbing marks, cracks around the clamp slot, or movement of the tie rod inside the clamp during routine inspections. Aluminum clamps can be damaged by overtightening, so tighten evenly and recheck after the first drives. Replace a clamp that is cracked, bent, or no longer grips the rod.
- Measure the tie rod diameter first
- Tighten evenly across the clamp
- Replace a cracked or bent clamp
Specifications
| Brand | Fox Racing Shox |
|---|---|
| Part number | 803-02-039 |
| UPC | 70000667175 |
| Size | 1 5/8 in. |
| Material | Aluminum |
| Type | Tie rod mounting clamp |
| Fitment | Universal Fit |
Vehicle fitment
Its suitability depends on the tie rod it mounts to, so confirm the clamp size against your tie rod and steering setup.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check that the clamp size matches the tie rod before tightening, using the 1 5/8 in. measurement as the reference.
What’s included
One mounting clamp is included. Fasteners and other hardware are not included, so gather them before installing.








