Overview
The Flowmaster 40 Series muffler, part 42441, is a chambered aluminized steel muffler with an offset inlet, a centered outlet and 2.25 inch tubes. The 40 Series is the original Flowmaster muffler, built for an aggressive street and strip sound. It is a universal fit, so it is sized by its tubing and mounting position rather than built for one vehicle.
Key features
- Aggressive street and strip sound
- Chambered design
- Offset inlet with centered outlet
- Aluminized steel body
- 2.25 inch inlet and outlet tubes
- Tone meant to be heard from inside and outside the vehicle
Street and strip use
A street and strip muffler is tuned for a louder, more direct note than a quiet daily unit. That character comes from the internal chambers and the material, and it tends to carry more clearly from the cabin when the throttle is opened. The offset inlet changes how exhaust gas enters the muffler, so the mounting angle and pipe run deserve a careful check before the car is driven.
Aluminized steel offers reasonable corrosion resistance at a lower cost than stainless, but the coating can wear at welds and under road salt. Inspect the seams and hanger points periodically, and look for heat discoloration near the inlet that could point to a restriction or leak.
- Check the offset inlet angle against the pipe run
- Inspect welds and hanger points for cracks
- Watch for leaks at clamps after heat cycles
Specifications
| Brand | Flowmaster Exhaust |
|---|---|
| Part number | 42441 |
| UPC | 700042010295 |
| Muffler type | Chambered |
| Inlet location | Offset |
| Outlet location | Centered |
| Material | Aluminized steel |
| Tube size (inlet/outlet) | 2.25 inches / 2.25 inches |
Vehicle fitment
Not tied to a specific year, make or model. Check the 2.25 inch pipe diameter and the offset inlet against your exhaust before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
The muffler is the only item included. Pipe, clamps and hangers are not part of this package.












