Overview
The Flex-A-Lite 852 is a belt-driven fan spacer adapter that threads onto the water pump in place of the clutch hub. It fits Ford Bronco, Bronco II, F-100, F-150, F-250, F-350 and Ranger models from 1980 to 1999 within the years and trims covered below. It is made of steel, measures 1.5 inches thick and is made in the U.S.A.
Standard mechanical fans install without modifications. The female threaded hole is 30mm x 1.5, and the thread is left hand.
Key features
- Threads onto the water pump in place of the clutch hub
- Steel construction, 1.5 inches thick
- Left hand thread with a female threaded hole of 30mm x 1.5
- Standard mechanical fans need no modifications to install.
- Made in the U.S.A.
Before you install a spacer
A fan spacer moves the cooling fan outward from the water pump, which changes how the fan sits in the shroud and how the belt lines up with the pulleys. Before fitting one, check the pump bearing for play, look for coolant weeping around the shaft, and make sure the drive belt is in good condition. A worn pump is far easier to address before the spacer goes on than after.
After installation, recheck belt alignment and tension, and confirm the fan clears the radiator and shroud through its full travel. Inspect the pump and adapter threads for damage before threading the adapter on. Tighten the fasteners firmly, then recheck them after the first few drives, since a spacer adds leverage on the pump.
- Look for coolant seepage at the pump weep hole
- Confirm the fan clears the shroud at full steering lock
- Recheck belt tension after the first drives
- Replace a noisy pump bearing before adding the spacer
Specifications
| Brand | Flex-A-Lite |
|---|---|
| Part number | 852 |
| UPC | 88657008525 |
| Material | Steel |
| Thickness | 1.5 inches |
| Thread | Left hand |
| Female threaded hole | 30mm x 1.5 |
| Origin | Made in the U.S.A. |
Vehicle fitment
The fitment covers 1980–1986 Ford Bronco, 1985–1986 Ford Bronco II, 1983 Ford F-100, 1983–1986 Ford F-150, 1982–1986 Ford F-250 and F-350, and 1983–1999 Ford Ranger, in the trims shown below.
F-150 and F-250 years after 1986 are not on the list, and neither are Ranger models after 1999 or Bronco II years after 1986. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The adapter takes the place of the clutch hub and has a left hand thread, so check the thread direction against your water pump before threading it on.
What’s included
The adapter is the item described here. Check the package contents against your installation before starting.







![Flex-A-Lite Electric Fan Motor Replacement For PN[394] - 30312](https://slickrock4x4.com/wp-content/images/30312-Flex-1-1-300x300.jpg)

