Select your vehicle

Flex-A-Lite Belt-Driven Fan Spacer – 879

Flex-A-Lite

Shop Flex-A-Lite Fan Spacer Kits on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Flex-A-Lite belt-driven fan spacer, part number FLX879
  • Converts varied hub pilot diameters to a standard 5/8-inch pilot
  • Machined aluminum, 1 inch thick
  • Universal fit

Description

Overview

The Flex-A-Lite 879 is a belt-driven fan spacer, part number FLX879, that adapts a range of hub pilot diameters to a standard 5/8-inch pilot. It also sets the fan’s distance from the radiator.

The aluminum spacer has a large bearing surface and a soft radius, a design meant to reduce point-loading on the fan center star. Point-loading is a common cause of stress cracking in that area. It is universal fit and is intended for use with Flex-A-Lite fans.

Key features

  • Converts a variety of hub pilot diameters to a 5/8-inch pilot
  • Large bearing surface with a soft radius design
  • Machined from aluminum
  • Sets the required spacing from the radiator

Why the spacer matters

On a belt-driven fan, the spacer carries the fan at the correct distance from the radiator and centers it on the hub. If the hub pilot is the wrong size, the fan can sit off-center, which causes vibration and uneven loading on the bolts and the fan center star.

Spacer thickness also changes how much clearance remains between the blades and the radiator core, so check the gap after installation with the fan fully tightened. Inspect the spacer surfaces for scoring or pitting when the fan is removed, and clean any corrosion from the mating faces. Use new fasteners if the old ones show stretch or thread damage. Belt tension and pulley alignment should also be checked, because a misaligned pulley can make the fan wobble even with a correct spacer.

Specifications

Brand Flex-A-Lite
Part number FLX879
Type Belt-driven fan spacer
Standard pilot diameter 5/8-inch
Thickness 1 inch
Material Aluminum
Fitment Universal fit

Vehicle fitment

The spacer is universal fit and is not vehicle-specific. Its suitability depends on your fan hub pilot diameter and the spacing your radiator needs.

Measure your fan hub before ordering. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Measure your fan hub pilot diameter first, because the spacer converts it to a 5/8-inch pilot. Check the spacing from the radiator with the spacer in place before tightening the fan.

What’s included

Belt-driven fan spacer, 1 inch thick, machined aluminum.

Questions & Answers

What does the Flex-A-Lite 879 fan spacer do?

It converts a variety of hub pilot diameters to a standard 5/8-inch pilot and provides the spacing needed from the radiator. It is a belt-driven fan spacer, part number FLX879.

What material is the 879 spacer made from?

It is machined from aluminum and is 1 inch thick. Measure your fan hub before buying to confirm the spacer suits it.

Does this spacer fit my vehicle?

It is universal fit, so it is not made for one vehicle. Confirm the hub pilot diameter and radiator spacing on your fan before ordering.

How can I tell if the fan spacer is worn?

Look for scoring, cracks or flattened areas on the bearing surface, and check for play when the fan is turned by hand. A spacer showing any of these signs, or a fan that wobbles after the spacer is seated, should be replaced rather than reused.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Flex-A-Lite Fan Spacer Kits on Amazon