Overview
The Firestone Ride-Rite 9054 is a pressure sender from the brand’s leveling compressor kit line. It replaces part numbers 2489, 2490, 2491, 2500 and 2501. It is marked universal fit, and no vehicle is named for it.
Key features
- Pressure sender for leveling compressor kits
- Replacement for PN 2489/2490/2491/2500/2501
- Described by the brand as universal fit
Reading a leveling system pressure signal
A pressure sender reads the air pressure in a leveling system and sends a signal to a gauge or controller. The reading is only as good as the sender’s connection to the line, so the mounting point, thread seal and wiring all affect accuracy. A sender that reads correctly on one day but jumps around on another often has a loose connector or a small air leak nearby.
Before replacing a sender, confirm the wiring and connector are clean and tight. Check the air line and fittings for leaks, since a leak can cause a low reading even when the sender works. A simple comparison with a known-good gauge helps show whether the sender or the system is at fault.
Replacement is straightforward when the part number matches. Use thread sealant suited to air fittings, avoid overtightening, and leak-check the connection once the system is pressurized. Keep the old sender until the new one is confirmed working.
- Check the connector and wiring before replacing the sender
- Look for leaks at the fitting
- Compare readings with a known-good gauge
Specifications
| Brand | Firestone Ride-Rite |
|---|---|
| Part number | 9054 |
| UPC | 767555129357 |
| Type | Pressure sender |
| Replaces part numbers | 2489/2490/2491/2500/2501 |
Vehicle fitment
No vehicle year, make or model is named for this sender. Confirm your sender’s part number against the replaced numbers before ordering.
Confirm your vehicle’s year, model and trim before ordering.









