Overview
The Curt Manufacturing 16021 is a heavy duty fifth wheel trailer hitch leg kit, part number 16021, rated at 24000 gross trailer weight. It is made for use with Q16, Q20, Q24 and E16 fifth wheel heads.
Leg kits support a fifth wheel head unit when the head is removed from the truck bed, so this kit suits owners who already run one of the listed heads and need stable support while it is off the truck.
Leg kit basics
A leg kit carries the fifth wheel head once it is off the truck, so the head stays level and does not rest on the bed rails or the ground. The legs take the weight, which means their pins, latches and feet need to seat fully every time the head is removed.
Leg kits are usually bought alongside the head they support, so match the kit to your head model before setting anything up. Keep the legs clean and lightly greased, and store the head with the locking mechanism free of grit. Inspect the legs and pins before each use for bends, cracks or worn holes.
- Confirm the head model before setup
- Keep leg pins clean and greased
- Check that legs sit level on firm ground
- Inspect pins and latches before each use
Specifications
| Brand | Curt Manufacturing |
|---|---|
| Part number | 16021 |
| UPC | 612314160211 |
| Duty rating | Heavy duty |
| Gross trailer weight | 24000 |
| Compatible fifth wheel heads | Q16, Q20, Q24, E16 |
Vehicle fitment
It is a universal fit kit, so it is not tied to a specific truck or trailer year, make or model. Fit depends on the fifth wheel head, and it works with the Q16, Q20, Q24 and E16 heads.
Fifth wheel heads other than Q16, Q20, Q24 and E16 are not covered. Confirm fit for your vehicle’s year, model and trim before ordering.
What’s included
Lay out every part and hardware piece against your installation plan before starting.


















