Overview
The Fabtech Steering Stabilizer Kit, part FTS8028, is a single steering stabilizer kit with hardware. Fabtech markets its stabilizers as a way to reduce bump steer and wheel shimmy, which can appear when oversized aftermarket wheels and tires are installed.
The kit is a direct fit single stabilizer, but no vehicle, year or chassis code is named, so fitment is not confirmed.
Key features
- Kit includes a steering stabilizer and hardware
- Designed to reduce bump steer and wheel shimmy
- Single configuration
- Stabilizer only type
- Shock boot not included
Bump steer and wheel shimmy
Bump steer is the tendency of the front wheels to turn as the suspension moves up and down, usually because the steering linkage travels on a different arc from the suspension. Wheel shimmy is a rapid side-to-side oscillation at speed. Both can appear after a lift or after fitting wider wheels and tires, since the geometry and the load on the steering change.
Before adding a stabilizer, check the tie rod ends, the drag link and the ball joints for play. A stabilizer resists movement but cannot correct a worn joint, so loose parts should be fixed first. Tire balance and pressure also play a role in shimmy, and they cost little to check. Recheck the setup after any change to wheel, tire or suspension height.
- Check tire balance and pressure
- Inspect the tie rod ends and drag link
- Confirm the steering linkage is square after a lift
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS8028 |
| UPC | 674866030343 |
| Kit contents | Steering stabilizer, hardware |
| Configuration | Single |
| Type | Stabilizer only |
| Brackets | Not included |
| Shock boot | Not included |
Vehicle fitment
No vehicle, year or chassis code is named for FTS8028. It is designed to work with Fabtech suspension systems, so confirm the application for your truck before mounting.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit includes hardware, but brackets are not included, so confirm which mounting parts you have before starting. Inspect steering linkage for free play after fitting.
What’s included
A steering stabilizer and hardware.
Not included: brackets and shock boot.








