Overview
The Fabtech FTS86154 is a shock absorber rebuild kit listed at 4 in. and with a piggyback reservoir. Its replacement O-rings and seals cover the rebuild of that shock.
A piggyback reservoir is a separate canister connected to the shock body by a hose. This kit is universal fit, so confirm the 4 in. size and reservoir type match your shock before ordering.
Key features
- Piggyback reservoir listed
- Replacement O-rings included
- Seals included
- Listed at 4 in.
- Designed as a universal fit kit.
Reservoir rebuild tips
A piggyback reservoir gives the shock extra room for fluid and gas, so it is common on shocks used for hard driving. During a rebuild the reservoir is a separate part of the job, with its own seals, hose ends and mounting. Keeping the hose clear of heat sources and moving parts helps prevent chafing and leaks over time.
Work through the reservoir and the shock body in order, and keep the small parts together as they come apart. Seat the new O-rings carefully so they are not pinched, and use only light lubrication on them. Before reinstalling, route the hose so it has room to flex without kinks.
- Check hose routing for heat and clearance
- Seat O-rings cleanly without pinching
- Inspect the reservoir mount for cracks
- Keep parts sorted in the order they come off
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS86154 |
| UPC | 674866019195 |
| Size | 4 in. |
| Reservoir | Piggyback reservoir |
| Included | Replacement O-rings and seals |
| Fitment | Universal fit |
Vehicle fitment
This is a universal fit kit, not tied to a specific year, make or model.
Confirm the 4 in. size and reservoir type against your shock. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A piggyback reservoir adds a hose and a separate mount to the rebuild, so check hose routing and mounting before reinstalling the shock.
What’s included
Replacement O-rings and seals, plus the piggyback reservoir listed with the kit.







