Overview
The Bilstein 7100 Series Rebuild Kit, part number B4-KT0-Y019A00, supplies seals, bands and O-rings for refurbishing Bilstein shock absorbers. A shock may need a rebuild after a leak or during routine maintenance, including after racing.
Kit contents depend on the application, so match the kit to your shock before starting work.
Key features
- Seals, bands and O-rings for shock rebuilds
- Addresses leaks and general maintenance
- Contents vary by application.
- Intended to restore the performance of Bilstein shocks
Signs a shock needs rebuilding
Shock absorbers lose damping when seals wear and fluid escapes. Common signs include oil on the shock body, a loss of control over bumps, a bouncy ride after braking, or noise from the shock on rough ground. Inspect the shaft and body for oil seepage before deciding whether a rebuild is worth the time and the cost of the parts.
Before ordering, record the shock’s markings and identify the model so the seals and bands are correct. Keep the removed seals for comparison while you assemble the new set, and clean all parts thoroughly. Shock rebuilds often pair with replacing worn bushings or mounts, which are worth checking at the same time while the shock is off the vehicle.
- Oil seepage around the shaft or body
- Bouncing or wallowing after bumps
- Noise over rough ground
Specifications
| Brand | Bilstein |
|---|---|
| Part number | B4-KT0-Y019A00 |
| UPC | 70000521456 |
| Series | 7100 |
| Contents | Seals, bands and O-rings (depending on application) |
Vehicle fitment
Rebuild seals are matched to a particular Bilstein shock, so the kit is not a universal fit. Identify the shock model and check the year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Rebuilding a shock means taking it apart, so match the kit to the shock first and keep the old seals for comparison. Wear eye protection while working on any shock absorber.
What’s included
The kit includes seals, bands and O-rings, with the exact set depending on application.
Not included: The shock absorber itself is not included.




