Overview
The Fabtech FTS86153 is a shock absorber rebuild kit listed at 2.50 in. without a reservoir. It includes replacement O-rings and seals for the rebuild.
The kit comes with replacement O-rings and seals and contains what is needed for the rebuild and reinstall. It is a universal fit kit, so match its 2.50 in. dimension to your shock before ordering.
Key features
- Includes replacement O-rings
- Includes seals
- Listed without a reservoir
- Listed at 2.50 in.
- Universal fit.
Before you rebuild
A shock rebuild is a good moment to inspect the parts that wear. Look at the shaft for scoring, pitting or bent sections, and check the piston and valving surfaces for damage. Any part that shows wear should be replaced rather than reused, because worn internal surfaces can leak and change how the shock controls movement on rough ground.
Keep the old seals out of the new assembly and make sure the new O-rings sit fully in their grooves. Clean all parts and keep them free of grit before reinstalling. A methodical order of disassembly makes reassembly far easier, so lay out each part as you remove it. Replace any part that cannot be cleaned to a smooth surface. Recheck for leaks after the first few hard drives.
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS86153 |
| UPC | 674866019201 |
| Size | 2.50 in. |
| Reservoir | Without reservoir |
| Included | Replacement O-rings and seals |
| Fitment | Universal fit |
Vehicle fitment
It is a universal fit kit, so it is not designed for one specific year, make or model.
Shock sizing varies, so confirm the 2.50 in. dimension matches your shock before ordering. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Shock rebuilds start with taking the shock apart, so set aside each part in order and replace the included seals and O-rings together.
What’s included
Replacement O-rings and seals.
Not included: a reservoir; the kit is listed without one.







