Overview
The Icon Suspension 2.5 inch IFP shock rebuild kit contains the seals needed to rebuild one 2.5 inch IFP coilover or basic shock. The kit also includes a nitrogen charge port.
ICON Vehicle Dynamics makes the kit. The company describes itself as an aftermarket suspension maker for trucks and SUVs and says every product it sells is made in the USA.
Key features
- Rebuilds one shock
- Designed for 2.5 inch IFP coilover and basic shocks
- Seals include a Disogrin u-cup and a d-wiper
- Seal head and floating piston o-rings included
- Nitrogen charge port included
Rebuild preparation and tools
An IFP shock uses a floating piston to separate the oil and nitrogen gas, so a rebuild starts with safely releasing that gas. Once the shock is open, the seals and piston rings do the work of keeping oil and gas where they belong. Clean parts and a careful workspace help the new seals seat properly.
Set up a clean bench and keep track of each part in order. Inspect the shaft and bore for scoring, pitting or debris before assembly, since damage there can tear a new seal. Work the new seals into place gently and avoid sharp tools that could nick the rubber.
- Clean the shock body thoroughly before opening
- Inspect the shaft for scoring or pitting
- Keep seals free of debris during fitting
Specifications
| Brand | Icon Suspension |
|---|---|
| UPC | 700007167591 |
| Shock size | 2.5 inch IFP |
| Shock type | Coilover and basic shocks |
| Rebuilds | One shock |
| Seals included | Disogrin u-cup, d-wiper, seal head o-ring, floating piston o-ring |
| Other | Nitrogen charge port |
Vehicle fitment
No vehicles are named for this kit because it is a rebuild kit for a 2.5 inch IFP shock rather than a vehicle-specific part. Compare the shock’s size and type with the kit before use.
Installation notes
The shock is gas charged, since the kit includes a nitrogen charge port. Release the gas pressure fully before disassembly, following the safe procedure for gas-charged shocks.
What’s included
The kit includes a Disogrin u-cup, a d-wiper, a seal head o-ring, a floating piston o-ring and a nitrogen charge port, enough to rebuild one shock.
Not included: The shock body and shaft, and any other parts beyond the seals and charge port.





