Overview
The Fab Fours M2050-1 is a third brake light for the 2007–2018 Jeep Wrangler (JK), including Unlimited trims. It has a 2 stage black powder coat finish and fits 2-door and 4-door models.
Fab Fours develops its products with 3D design software, and metal cutting and forming take place in its own factory. Installation needs part FFIJP-Y1261T-1, which must be obtained separately.
Key features
- 2 stage black powder coat finish
- Built for 2-door and 4-door models
- Fits Wrangler (JK) and Wrangler Unlimited trims, 2007–2018
- Installation requires separate part FFIJP-Y1261T-1
- Fab Fours part number M2050-1 and UPC 5810109219
Before you install a brake light
A third brake light sits high on the vehicle, where it is easy to see from behind. Its job is to make braking obvious to following drivers, so the wiring must be right before the vehicle goes back on the road. Test the brake function with a helper before reinstalling interior panels or trim.
Clean the mounting surface and check the gasket or seal around the light before fitting it. Water getting behind a brake light can cause corrosion in the connector and dim the lamp over time. Rear wiring on a Wrangler runs through the body, so take care not to pinch or chafe any wire during reassembly.
If the old light has failed, check the wiring and connector for corrosion rather than replacing the lamp alone. Route any new harness away from hot or moving parts.
- Test the brake function before reassembly
- Check the seal and gasket for cracks
- Inspect the connector for corrosion
Specifications
| Brand | Fab Fours |
|---|---|
| Part number | M2050-1 |
| UPC | 5810109219 |
| Product type | Third brake light |
| Finish | 2 Stage Black Powder Coat |
| Body style | 2-door and 4-door models |
| Required for installation | Part number FFIJP-Y1261T-1 (needed for installation, not included) |
| Fitment | Direct fit |
Vehicle fitment
The manufacturer fitment list covers the 2007–2018 Jeep Wrangler (JK) and Wrangler Unlimited in the 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X trims.
Newer JL Wrangler and Gladiator models, and older TJ and YJ Wranglers, are not in this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Part number FFIJP-Y1261T-1 is needed for installation, so have it on hand before starting. Disconnect the battery before working on the rear wiring.
What’s included
The third brake light with its 2 stage black powder coat finish.
Not included: part number FFIJP-Y1261T-1, needed for installation.









